RELIANCE 45C15C工控控制卡件
1.产 品 介 绍
品牌：RELIANCE
型号说明：RELIANCE 45C15C工控控制卡件
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
RELIANCE 45C15C有关I/O总线的构造，请参阅B 9302装配套件和H41q装配套件的数据表。输入/输出机架本身没有代码。您只需注意模块和相应电缆连接器的正确位置。必须检查现有保险丝模块（包括保险丝）的完整性。还应检查24 V电源是否正确分配给需要通过后总线馈电的此类模块的插槽。8.6.4接通HIMA PES。连接工作电压后，如果用户程序已加载且系统中未发现错误，RELIANCE 45C15C PES将进入运行状态。如果显示STOP（停止），则存在错误。只有在纠正错误后，例如设置正确的开关位置或跳线、正确的连接线，或可能在更换模块后，才开始运行操作。RELIANCE 45C15C
For the construction of the I/O bus refer to the data sheets of the B 9302 assembly kit and of the H41q ass. kits. The input/output racks themselves have no code. You only have to pay attention to the correct position of the module and the corresponding cable connector. The existing fuse modules including fuses have to be checked for completeness. RELIANCE 45C15CAlso check the correct assignment of the 24 V supply to the slots of such modules which need the feeding via the rear bus. 8.6.4 Switching on the HIMA PES After the operating voltage has been connected, the HIMA PES goes into RUN operation, if the user program has been loaded and no error has been found in the system. If STOP is displayed there is an error. Only after the correction of the error, e.g. setting the correct switch position or jumper, correct connecting lines, or possibly after the exchange of a module etc. is the RUN operation started.RELIANCE 45C15C
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
