ABB DSTA180 57120001-ET工控控制卡件
1.产 品 介 绍
品牌：ABB
型号：ABB DSTA180 57120001-ET
产品说明：工控控制卡件
优势：供应进口原装正品，专业停产配件。
2.产 品 详 情 资 料：
ABB DSTA180 57120001-ET通信设置可能不匹配。如果PLC的串行端口通信设置和编程软件的通信设置不匹配，它们将无法通信。这些设置包括BAUD Rate（波特率）、Parity（奇偶校验）、Stop Bits（停止位）等。如果您怀疑这是问题所在，请尝试直接连接到PLC，ABB DSTA180 57120001-ET如上文“SNP ID可能不正确”中所述。如果无法直接连接，则可能存在通信设置不匹配。如果是，请尝试将编程软件设置为其默认通信设置。可能无法选择Multidrop作为连接方法。编程软件中的默认连接方法是Direct，这要求您直接连接到PLC或模块的编程器端口。如果此默认设置未更改为Multidrop，您将无法通过多点系统连接到选定的SNP ID。ABB DSTA180 57120001-ET
Communications settings may not match. If the PLC’s serial port communication settings and the programming software’s communication settings do not match, they will not be able to communicate. These settings include such things as BAUD Rate, Parity, ABB DSTA180 57120001-ETStop Bits, etc. If you suspect this to be the problem, try connecting directly to the PLC as described above in ABB DSTA180 57120001-ET“SNP ID may be incorrect.” If you cannot connect directly, there may be a communication settings mismatch. If so, try setting the programming software to its default communication settings.Multidrop may not be selected as the connection method. The default connection method in the programming software is Direct, which requires that you be connected directly to a PLC or module’s programmer port. If this default setting is not changed to Multidrop, you will not be able to connect to a selected SNP ID over a multidrop system.ABB DSTA180 57120001-ET
3.产 品 展 示
4.公 司 优 势
5.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
