METTLER TOLEDO IND780显示控制器面板
1.产 品 介 绍
品牌：METTLER TOLEDO
型号：METTLER TOLEDO IND780
产品说明：显示控制器面板
优势：供应进口原装正品，专业停产配件。
2.产 品 详 情 资 料：
METTLER TOLEDO IND780定制-对于间隔超过40英寸（米）的PLC，需要定制长度的电缆。规范如下所示。多点系统中主（编程器）和从设备（PLC或选件模块）之间的最大电缆长度为4000英尺（2.9米）。从设备的最大数量限制为8个。电缆和连接器规范电缆组件是通信故障的最常见原因之一。METTLER TOLEDO IND780为获得最佳性能，请使用推荐的连接器零件和规格构建电缆组件。90系列PLC：METTLER TOLEDO IND780串行（RS-422）端口，带公制硬件连接器连接器：5针公头，D型微型，Cannon DA 5S（锡锅）机罩：AMP 207470-连接器外壳硬件套件：AMP 20787-套件包括2个公制螺钉和2个螺丝夹微型转换器：用于连接到IC690ACC90微型转换器连接器：5针内螺纹，DB 5F，机罩：AMP#207470-或同等M3锁：AMP#208 0或同等
Custom built - For PLCs that are more than 40 inches ( meter) apart, it is necessary to build a custom length cable. The specifications are provide below.The maximum cable length between a master (programmer) and slave device (PLC or Option module) in a multidrop system is 4,000 feet .The maximum number of slave devices is limited to eight.METTLER TOLEDO IND780Cable and Connector Specifications The cable assembly presents one of the most common causes of communication failure. For best performance, construct the cable assemblies using the recommended connector parts and specifications.Series 90 PLC: Serial (RS-422) port with metric hardware Connectors Connector: 5-pin male, D-Subminiature Type, Cannon DA5S (solder pot) Hood: AMP 207470- connector shell Hardware Kit: AMP 20787METTLER TOLEDO IND780Kit includes 2 metric screws and 2 screw clips Miniconverter: For connecting to IC690ACC90 miniconverter Connector: 5-pin female, DB5F, Hood: AMP #207470-METTLER TOLEDO IND780 or equivalent M3 Latchblocks: AMP or equivalent
3.产 品 展 示
4.公 司 优 势
5.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
