SST SST-ESR2-CPX-P工控控制卡件
1.产 品 介 绍
品牌：SST
型号：SST SST-ESR2-CPX-P
产品说明：工控控制卡件
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
SST SST-ESR2-CPX-P工控控制卡件可选使用隔离+24伏电源输出；然而，该输出可用于驱动有限数量的输入设备。电源的最大总功率输出额定值为30瓦；然而，根据电源目录号，单个+5VDC输出可以额定为15瓦或30瓦。详见表12-1“电源特性比较表”。SST SST-ESR2-CPX-P硬件组件的负载要求下表显示了每个模块和硬件组件所需的DC负载。所有额定值均以毫安为单位（除非另有说明）。输入和输出模块电流额定值为所有输入或输出打开时的额定值。表中列出了三个电压：VDC提供主电源以操作大多数内部电路继电器电源为驱动继电器模块上继电器的电路供电+24 VDC隔离提供电源以操作多个输入电路（仅限输入模块），SST SST-ESR2-CPX-P以及连接到电源端子板上的24 VDC输出端子的任何外部电路。请注意，下表中列出的数字是最大（最坏情况）要求，而不是典型要求。SST SST-ESR2-CPX-P
Use of the Isolated +24 Volt power supply output is optional; however, this output can be used to drive a limited number of input devices. The maximum total power output rating of the Power Supplies is 30 watts; however, the individual +5VDC outputs can be rated for either 15 or 30 Watts, depending on the Power Supply catalog number. See Table 12-1, “SST SST-ESR2-CPX-PPower Supply Feature Comparison Table,” for details. Load Requirements for Hardware Components The following table shows the DC load required by each module and hardware component. All ratings are in milliamps (except where noted).SST SST-ESR2-CPX-P Input and Output module current ratings are with all inputs or outputs on. Three voltages are listed in the table:VDC provides primary power to operate most internal circuits Relay Power provides power for circuits that drive the relays on Relay modules +24 VDC Isolated provides power to operate a number of input circuits (input modules only), and any external circuits connected to the 24 VDC Output terminals on the power supply terminal strip. Note that the figures listed in the following table are maximum (worst case) requirements , not typical requirements.SST SST-ESR2-CPX-P
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
