SEW MDF60A-0075-5A3-4-00变频器
1.产 品 介 绍
品牌：SEW
型号：SEW MDF60A-0075-5A3-4-00
产品说明：变频器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
SEW MDF60A-0075-5A3-4-00变频器注：这些电缆取代了过时的SEW MDF60A-0075-5A3-4-00。过时的电缆有直接头。这些替换电缆具有直角连接器，以减少PLC前面所需的间隙空间。它们使用与过时电缆相同的引脚。说明这些电缆的每一端都有一个直角24针连接器。SEW MDF60A-0075-5A3-4-00除了连接器方向（右侧和左侧类型）和电缆长度外，它们都相同。连接器方向的不同之处在于允许它们与32点I/O模块的双连接器类型一起工作。这些电缆采用针对针接线（即，针A1到针A1，针A2到针A2等）。类似的电缆有3米长，一端有直角连接器，另一端有剥线引线（有关更多信息，请参阅IC693CBL327/328电缆的数据表）。24芯电缆中的每根导线的额定电流为1.2安培。如果将这些电缆与具有较高输出电流额定值的16点输出模块一起使用，SEW MDF60A-0075-5A3-4-00则最大负载电流额定值必须使用较低的值1.2。如果现场设备需要1.2安培以上的电流，请勿使用TBQC组件。请改用标准接线板。
Note: These cables replace obsolete SEW MDF60A-0075-5A3-4-00. The obsolete cables had straight connectors. These replacement cables have right-angle connectors to reduce the clearance space required in front of the PLC. They use the same pin-outs as the obsolete cables. Description These cables all have a right-angle 24-pin connector on each end. They are identical except for connector orientation (right side and left side types) and cable length. The difference in connector orientation is to allow them to work with the dual-connector type of 32-point I/O modules. SEW MDF60A-0075-5A3-4-00These cables are wired pin-to-pin (that is, pin A1 to pin A1, pin A2 to pin A2, etc.). Similar cables are available in a 3 meter length that have a right angle connector on one end and stripped leads on the other (see the data sheet for the IC693CBL327/328 cables for further information).Each conductor in these 24-conductor cables has a current rating of 1.2 Amps. If using these cables with a 16-point Output module with a higher output current rating, you must use the lower value of 1.2 for the maximum load current rating . If you have field devices that require more than 1.2 Amps, do not use a TBQC assembly. Use the standard Terminal Board instead.SEW MDF60A-0075-5A3-4-00
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
