ABB CI626A 3BSE005029R1接口模块
1.产 品 介 绍
品牌：ABB
型号：ABB CI626A 3BSE005029R1
产品说明：接口模块
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
ABB CI626A 3BSE005029R1接口模块当使用100%屏蔽电缆时，系统中的所有本地（CPU和扩展）底板必须牢固地参考同一接地点，否则底板之间的电位差可能会干扰信号传输。早期远程基板版本的用户警报在早期远程基板版ABB CI626A 3BSE005029R1和ABB CI626A 3BSE005029R1（及更早）中，有必要移除电缆插入基板的配合电缆的引脚1。这意味着，当使用工厂制造的Y形电缆（ABB CI626A 3BSE005029R1时，必须在将引脚1与其中一个基板一起使用之前，将其从插入远程基板的阳端断开。这些底板的定制Y形电缆应使用图10-20进行制造。远程底板IC693CHS393F（及更高版本）和IC693CHS 399E（及更新版本）在底板内部进行了更改，无需从配套电缆上拆下销1。当将工厂制造的Y形电缆与这些底板一起使用时，无需从电缆上拆下销1。
When using 100% shielded cables all local (CPU and expansion) baseplates in the system must be solidly referenced to the same ground point or a potential difference between baseplates could disturb signal transmission. Alert for Users of Early Remote Baseplate Versions In early remote baseplates versions, ABB CI626A 3BSE005029R1(and earlier) and ABB CI626A 3BSE005029R1 (and earlier), it is necessary to remove pin 1 of the mating cable where the cable plugs into the baseplate. This means that when using a factory made Wye cable, such as IC693CBL300, you must break pin 1 out of the male end where it plugs into the remote baseplate before using it with one of these baseplates. Custom built Wye cables for these baseplates should be built using Figure 10-20.Remote baseplates ABB CI626A 3BSE005029R1 (and later) and ABB CI626A 3BSE005029R1 (and later) have a change inside the baseplate which eliminates the need to remove pin 1 from the mating cable. When using factory made Wye cable with these baseplates, it is not necessary to remove pin 1 from the cable.
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
