DEIF RMC-111D电源电流继电器
1.产 品 介 绍
品牌：DEIF
型号：DEIF RMC-111D
产品说明：电源电流继电器
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
DEIF RMC-111D电源电流继电器内部保险丝TCM的内部保险丝为2安培、125V超小型保险丝（Littlefuse Microfuse，产品目录号273 002或同等产品）。如果P（外部电源）LED不亮，则内部保险丝可能断开。要访问此保险丝：关闭PLC的电源，然后卸下TCM模块。在轻轻向外拉动前盖的同时，DEIF RMC-111D用小型（“袖珍”）标准螺丝刀松开前盖侧卡舌。用一对尖嘴钳将保险丝向前拉出模块前部，轻轻地将其拆下。警告仅更换正确尺寸和类型的保险丝。使用不正确的保险丝可能会导致人员伤害、设备损坏或两者兼而有之。DEIF RMC-111D之间的自动数据传输PLC CPU通过在每次PLC扫描时自动向其传递命令来控制TCM。这些命令包含在%Q位和%AQ字中，用于命令启用/禁用输出、自动/手动模式、执行自动调整、设定值和报警限值。作为回报，TCM通过每次PLC扫描自动传递%I位和%AI字向PLC CPU发送信息。TCM发送的信息包括报警和输出短路状态、电流温度、PWM周期和TCM错误代码。DEIF RMC-111D
Internal Fuse The TCM’s internal fuse is a 2 Amp, 125V subminiature type (Littlefuse Microfuse, Catalog Number 273 002 or equivalent). If the P (External Power) LED will not light, the internal fuse may be open. To access this fuse:DEIF RMC-111DTurn off power to the PLC, then remove the TCM module. While gently pulling outward on the front cover, release the front cover side tabs with a smallDEIF RMC-111Dstandard screwdriver. Gently remove the fuse by pulling it forward, out of the front of the module, with a small pair of needle nose pliers. Warning Replace fuse only with the correct size and type. Using an incorrect fuse can result in harm to personnel, damage to equipment, or both.Automatic Data Transfers Between TCM and PLC The PLC CPU controls the TCM by automatically passing commands to it on each PLC sweep. These commands are contained in %Q bits and %AQ words that command such things as Enable/Disable Output, Auto/Manual Mode, Do Autotuning, Setpoint values, and Alarm Limit values. In return, the TCM sends information to the PLC CPU by automatically passing %I bits and %AI words each PLC sweep. The information sent by the TCM includes Alarm and Output Short Circuit status, Current Temperature, PWM Period, and TCM Error Code.DEIF RMC-111D
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
