KEBA DM272/A控制器模块
1.产 品 介 绍
品牌：KEBA
型号：KEBA DM272/A控制器模块
产品说明：模块卡件
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
KEBA DM272/A控制器模块具有模块化CPU（331及更高版本）的单个Series 90-30 PLC系统可以支持多个字母数字显示协处理器，并且必须位于CPU基板中。该模块有一个支持两个串行端口的连接器，每个端口专用于特定操作。端口1最常用于连接到运行GE Fanuc PCM开发软件（PCOP）的计算机的RS-232串行COM端口。KEBA DM272/A或者，端口1可以连接到串行RS-232打印机（请参阅下面的“电缆”部分）。默认情况下，端口2配置为19.2 Kbaud RS-232端口。它可以用于连接到具有键盘输入和屏幕输出的终端。使用Workmaster II、Workmaster或安装了PCM开发软件（PCOP）的IBM兼容PC、XT、AT或PS/2计算机完成串行端口编程和配置。编程计算机连接到端口1（请参阅下面的“电缆”部分）。默认设置为19200 bps。PCM Development Software（PCM开发软件）用于配置串行端口参数，并将CIMPLICITY 90-ADS软件安装到ADC上。KEBA DM272/A
Multiple Alphanumeric Display Coprocessors can be supported in a single Series 90-30 PLC system with modular CPU (331 and higher) and must be located in the CPU baseplate. This module has a single connector which supports two serial ports, with each port being dedicated to a specific operation. Port 1 is most often used to connect to an RS-232 serial COM port of a computer running GE Fanuc PCM Development Software (PCOP). Alternately, port 1 may be connected to a serial RS-232 printer (see the “Cables” section below.). By default, Port 2 is configured as a 19.2 Kbaud RS-232 port. KEBA DM272/AIt can be used to interface to a terminal with keyboard input and screen output. Serial port programming and configuration are done using a Workmaster II, Workmaster, or an IBM-compatible PC, XT, AT, or PS/2 computer with PCM Development Software (PCOP) installed. The programming computer connects to Port 1 (see the “Cables” section below) . The default setting is 19,200 bps. The PCM Development Software is used to configure the serial port parameters and to install the CIMPLICITY 90-ADS software onto the ADC.KEBA DM272/A
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
