NI PXIE-4498接口模块
产品详情资料：
NI PXIE-4498接口模块程序支持短动作程序，称为程序0，可在配置软件非易失性存储器中创建，用于使用APM运动编程软件创建的10个程序和40个子例程。存储在闪存中的编程单元（用户单元）DSM固件的用户缩放通过其前面板COMM端口进行更新。使用命令参数作为加速度、速度、移动、，NI PXIE-4498在PLC表和DSM302之间自动数据传输，无需用户编程。易于与工厂电缆和接线板以及用于连接编程设备的串行端口进行I/O连接。串行端口还允许“软”“固件升级，存储在闪存中。控制GE Fanuc数字伺服、NI PXIE-4498模拟SL系列伺服或第三方模拟伺服。每个伺服轴的起始和超行程开关输入。每个位置反馈输入的两个位置捕捉选通输入5v、24v和模拟I/O，供PLC A Quad B编码器输入用于从动主轴13位模拟输出c可由PLC控制或用作伺服调节监视器
NI PXIE-4498Program support for a short motion program, called Program 0, which can be created in the configuration software Non-volatile storage for 10 programs and 40 subroutines, created with the APM Motion Programming software. User scaling of programming units (User Units) DSM firmware, stored in Flash memory, is updated via its front panel COMM port. Generic programming using command parameters as operands for Acceleration, Velocity, Move, and Dwell Commands Automatic Data Transfer between PLC tables and DSM302 without user programming Ease of I/O connection with factory cables and terminal blocks as well as a serial port for connecting programming devices. The serial port also allows ”soft“ upgrades to firmware, which is stored in Flash memory. Control of GE Fanuc Digital servos, analog SL Series Servos, or third party analog servos. Home and overtravel switch inputs for each Servo Axis Two Position Capture Strobe Inputs for each Position Feedback Input 5v , 24v and analog I/O for use by PLC A Quad B Encoder input for Follower Master axis 13 bit Analog Output can be controlled by PLC or used as Servo Tuning monitorNI PXIE-4498
品牌：NI
型号：NI PXIE-4498
产品说明：接口模块
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
产 品 展 示
关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
