ABB DSDO120 57160001-AK电路板
产品详情资料：
ABB DSDO120 57160001-AK电路板模块上的DIP开关必须设置为FIP位置，以便远程I/O扫描器与Series 90-70 PLC通信。模块说明FIP远程I/O扫描器是一个标准的90-30系列PLC模块，可轻松插入底板的底板，用于两条FIP总线电缆的9针公D连接器。可以在不干扰总线连续性的情况下从模块上断开总线。第二总线是第一总线的备份；其使用是可选的。FIP同步电缆的SYNCHRO连接器。ABB DSDO120 57160001-AK它需要匹配连接器，如Molex#39-01-4031。在Series 90-70 PLC应用程序中不使用同步功能。（接地）同步器接头下方的凸耳用于模块接地线（提供）。接地线的另一端必须连接到底板左下角的安装螺栓和底盘接地。ABB DSDO120 57160001-AK
The DIP switch on the module must be set to the FIP position for the Remote I/O Scanner to communicate with a Series 90-70 PLC.ABB DSDO120 57160001-AKModule Description The FIP Remote I/O Scanner is a standard Series 90-30 PLC module that plugs easily into the backplane of the baseplate.9-pin male D connectors for two FIP bus cables. A bus can be disconnected from the module without disturbing the continuity of the bus. The second bus is a backup for the first bus; its use is optional. SYNCHRO Connector for a FIP synchronization cable. It requires a mating connector such as Molex #39-01-4031. The synchronization capability is not used in a Series 90-70 PLC application. (ground) The lug below the Synchro connector is used for the module ground wire (provided). The other end of the ground wire must be connected to the mounting bolt on the lower left corner of the baseplate and to chassis ground.ABB DSDO120 57160001-AK
品牌：ABB
型号：ABB DSDO120 57160001-AK电路板
产品说明：控制器模块
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
产 品 展 示
关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
