Lust LTi Drives LSH-050-2-45-320/T1.1R驱动器
产品详情资料：
Lust LTi Drives LSH-050-2-45-320/T1.1R驱动器FIP总线控制器是标准的机架式Series 90-30 PLC模块。它很容易插入PLC的背板。模块底部的闩锁将其固定到位。9针FIP现场总线连接器（通道1）9针FIF现场总线连接器，（通道2）15针串行连接器RS-485模块正常运行载波检测信道1传输启用信道1载波检测信道2传输启用信道2图8-7。Series 90-30 FIP总线控制器模块上没有可设置的DIP开关或跳线。Series 90-30 FIP总线控制器具有六个状态指示灯、一个RS-485串行端口和两个相同的FIP总线连接器。Lust LTi Drives LSH-050-2-45-320/T1.1R状态指示灯FIP总线控制器前面的6个指示灯显示模块状态和通信活动。串行端口15针串行端口用于连接计算机，以升级总线控制器的操作固件，并通过外部配置工具FIP总线连接器进行配置。FIP总线控制器上的两个9针连接器用于连接一个或两个FIP总线。两条总线提供冗余总线功能Lust LTi Drives LSH-050-2-45-320/T1.1R
The FIP Bus Controller is a standard, rack-mounted Series 90-30 PLC module. It plugs easily into the PLC’s backplane. The latch on the bottom of the module secures it in position. 9-Pin FIP Fieldbus Connector (channel 1) 9-Pin FIP Fieldbus Connector (channel 2) 15-Pin Serial Connector RS-485 Module OK Run Carrier Detect Ch. 1 Transmit Enable Ch. 1 Carrier Detect Ch. 2 Transmit Enable Ch. 2 Figure 8-7. Series 90-30 FIP Bus ControllerLust LTi Drives LSH-050-2-45-320/T1.1RThere are no DIP switches or jumpers to set on the module. The Series 90-30 FIP Bus Controller has six status LEDs, an RS-485 serial port, and two identical FIP bus connectors. Status LEDs The 6 LEDs on the front of the FIP Bus Controller display module status and communications activity. Serial Port The 15-pin serial port is used to connect a computer for upgrading the operating firmware of the Bus Controller and for configuring by an external configuration tool FIP Bus Connectors The two 9-pin connectors on the FIP Bus Controller provide for attachment of one or two FIP busses. The two busses provide a redundant bus capabilityLust LTi Drives LSH-050-2-45-320/T1.1R
品牌：Lust LTi Drives
型号：Lust LTi Drives LSH-050-2-45-320/T1.1R
产品说明：驱动器
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
产 品 展 示
关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
