ABB DSBC176 3BSE019216R1处理器板
产品详情资料：
ABB DSBC176 3BSE019216R1处理器板90-30系列PLC CPU：GBC模块可用于以下CPU型号：IC693CPU311K、321K、331L或更高版本，ABB DSBC176 3BSE019216R1的任何版本。CPU固件必须为5.0版或更高版本。ABB DSBC176 3BSE019216R1需要Logicmaster 90-30 5.0版（IC641SWP301L、304J、306F、307F）、VersaPro或Logic Developer PLC软件。Series Six PLC要与Genius总线控制器交换全局数据，Series Six总线控制器必须是目录号IC660CBB902F/903F（固件版本1.5）或更高版本。Genius手持式监视器Genius手持式监测器可用于显示为全局数据配置的GBC总线地址、其软件版本和Series Six寄存器地址。需要HHM IC660HHM501H（4.5版）或更高版本。GBC模块上没有手持式监视器连接器，但手持式监视器可以在连接到总线上的任何其他设备时与GBC通信。可选地，可以在GBC附近的总线上安装额外的HHM配合连接器。ABB DSBC176 3BSE019216R1
Series 90-30 PLC CPU: The GBC module can be used with CPU models: IC693CPU311K, 321K, 331L or later, or any version of the ABB DSBC176 3BSE019216R1. The CPU firmware must be release 5.0 or later. Logicmaster 90-30 version 5.0 (IC641SWP301L, 304J, 306F, 307F), VersaPro, or Logic Developer-PLC software is required. Series Six PLC To exchange global data with a Genius Bus Controller, the Series Six Bus Controller must be catalog number IC660CBB902F/903F (firmware version 1.5), or later.Genius Hand-Held Monitor The Genius Hand-Held Monitor can be used to display the GBC bus address, its software version, and the Series Six register address configured for global data. HHM version IC660HHM501H (revision 4.5) or later is required. There is no Hand-Held Monitor connector on the GBC module, but a Hand-Held Monitor can communicate with the GBC while connected to any other device on the bus. Optionally, an additional HHM mating connector can be installed on the bus near the GBC.ABB DSBC176 3BSE019216R1
品牌：ABB
型号：ABB DSBC176 3BSE019216R1
产品说明：处理器板
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
产 品 展 示
关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
