DEIF PPM-3/DGM DEIF模块现货
产品详情资料：
DEIF PPM-3/DGM DEIF模块现货在存储或装运CPU期间维护RAM内存模块化CPU模块化CPU具有备用电池的内部连接器，以便在存储或运输CPU时保留RAM内存内容。当CPU模块安装在基板中且备用电池安装在电源中时，不应使用这种布置。要在CPU模块中使用备用电池，DEIF PPM-3/DGM必须卸下CPU模块的前盖。这可以通过以下步骤完成：为了避免CPU从PLC中取出后丢失内存内容，我们建议您在20分钟内将备用电池安装到CPU中。首先，确保PLC电源已关闭，然后卸下CPU模块。轻轻挤压CPU模块的前盖并将其向前拉，远离模块外壳，同时用小螺丝刀依次轻轻按压4个前盖卡舌。前盖凸舌卡入模块壳体两侧的孔中（前盖固定凸舌的位置参见图2-1DEIF PPM-3/DGM
DEIF PPM-3/DGMMaintaining RAM Memory During Storage or Shipment of a CPU Modular CPUs Modular CPUs have an internal connector for a backup battery so that RAM memory contents can be retained while the CPU is being stored or shipped. This arrangement should not to be used when the CPU module is installed in the baseplate and the backup battery is installed in the power supply. To use a backup battery in the CPU module, it is necessary to remove the front cover of the CPU module. This can be accomplished by following these steps:To avoid losing memory contents once the CPU is removed from the PLC, we recommend you install the backup battery into the CPU within 20 minutes. First, make sure PLC power is off, then remove the CPU module.Gently squeeze the front cover of the CPU module and pull it forward, away from the module case, while gently pressing in on the 4 front cover tabs sequentially with a small screwdriver. The front cover tabs latch into holes on each side of the module case (refer to Figure 2-1 for location of front cover holding tabs).DEIF PPM-3/DGM
品牌：DEIF
型号：DEIF PPM-3/DGM DEIF模块现货
产品说明：控制器
特点：模块/卡件，控制器，触摸屏，伺服驱动器
产 品 展 示
产 品 展 
公 司 主 营 优 势
应 用 行 业
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
