NI PXI-6031E多功能I/O卡
品牌：NI
型号：NI PXI-6031E
产品说明：多功能I/O卡
NI PXI-6031E多功能I/O卡中文资料：
NI PXI-6031E多功能I/O卡CPU 350-374不支持90系列存储卡（用于手持式编程器）。ŶHHP的PROGRAM模式支持的唯一操作是向CPU的闪存写入和读取。Ŷ虽然HHP的CONFIG模式可用于执行这些CPU的基本配置，但它无法处理专用参数，例如与CPU364/374中的嵌入式以太网接口相关的参数。ŶHHP可用于更改时间时钟，除非Mem Protect配置参数设置为Enabled（启用），且钥匙锁开关处于ON（保护）位置。ŶHHP可用于编辑%R寄存器中的数据值。ŶHHP可用于调用或清除CPU 350-364上的覆盖。CPU374不支持HHP。表示CPU固件9.0版及更高版本中支持的功能。350–374 CPU高级功能的详细信息升级旧版CPU旧版CPU固件不支持上表中的某些功能（请参阅表脚注）。NI PXI-6031E通过将这些功能升级到CPU固件版本9.0或更高版本，可以将其添加到较旧的350–360 CPU。（363和364 CPU在作为新产品发布时配备了固件版本9.0。）此升级不需要更改硬件。有关升级主题的更多信息，请参阅本章前面的标题“CPU固件升级”。NI PXI-6031E
英文资料
The Series 90 Memory Card (used on the Hand-Held Programmer) is not supported by CPUs 350—374. Ŷ The only operations supported by the HHP’s PROGRAM mode are writing to and reading from the CPU’s flash memory. Ŷ Although the HHP’s CONFIG mode can be used to perform basic configuration of these CPUs, it cannot handle specialized parameters such as those pertaining to the embedded Ethernet Interface in the CPU364/374. Ŷ The HHP can be used to change the Time-of-Day Clock unless the Mem Protect configuration parameter is set to Enabled and the keylock switch is in the ON (Protect) position. Ŷ The HHP can be used to edit data values in %R registers. Ŷ The HHP can be used to invoke or clear overrides on CPUs 350—364 Ŷ The CPU374 does not support the HHP.Denotes features supported in CPU firmware release 9.0 and later. Details of 350 – 374 CPU Advanced Features Upgrading Older CPUs Older versions of the CPU firmware do not support some of the features in the table above (see table footnote). These features may be added to older 350 – 360 CPUs by upgrading them to CPU firmware version 9.0 or later. (The 363 and 364 CPUs were equipped with firmware version 9.0 when released as new products.) No hardware changes are required for this upgrade. For more information on the subject of upgrading, see the heading “CPU Firmware Upgrades” earlier in this chapter.NI PXI-6031E
每 日 展 示
公 司 主 营 优 势
应 用 行 业
