NI PXIe-8105嵌入式控制器
品牌：NI
型号：NI PXIe-8105
产品说明：嵌入式控制器
NI PXIe-8105嵌入式控制器中文资料：
NI PXIe-8105嵌入式控制器到背板的输出电压连接（所有电源）下图说明了这三个输出电压如何在内部连接到基板上的背板。安装在基板上的模块所需的电压和功率通过基板连接器过电流保护（所有电源）提供。5V逻辑输出电子限制为3.5安培（高容量电源为7安培）。内部检测到过载（包括短路），NI PXIe-8105导致电源关闭。电源将持续尝试重新启动，直到过载消除。输入线路中的内部保险丝作为备用。电源通常会在保险丝熔断之前关闭。保险丝还可防止内部电源故障。时序图下面的时序图显示了DC输入到DC输出以及电源生成的电源OK信号（PSOK）的关系NI PXIe-8105
英文资料
Output Voltage Connections to Backplane (All Supplies) The following figure illustrates how these three output voltages are connected internally to the backplane on the baseplate. The voltage and power required by modules installed on the baseplate is supplied through the baseplate connectors Overcurrent Protection (all Supplies) The 5V logic output is electronically limited to 3.5 amps (7 amps for high capacity supplies). An overload (including short circuits) is sensed internally and causes the supply to shut down. The supply will continually try to restart until the overload is removed. An internal fuse in the input line is provided as a backup. The supply will usually shut down before the fuse blows. The fuse also protects against internal supply faults. Timing Diagram The timing diagram below shows the relationship of the DC input to the DC outputs and to the Power Supply OK signal (PSOK) generated by the power supplyNI PXIe-8105
每 日 展 示
公 司 主 营 优 势
应 用 行 业
