GESPAC GESSBS-6A电路板
在树结构中，右键单击“校准”，然后单击“添加校准”以打开“创建校准”对话框。13.完成“创建校准”对话框，然后单击“确定”。在树结构中，右键单击“依赖项”，然后单击“添加依赖项”以打开“创建依赖项”对话框。15.完成“创建依赖项”对话框，然后单击“确定”。如果所有节点都有效，则编译机制，请参阅第288页的编译机制。创建输送机机构1。单击“创建机制”。机制建模器以创建模式打开。2.在“机构模型名称”对话框中，输入机构名称。3.从机构类型列表中，选择输送机。4.从“选定零件”列表中，选择“Par 5”。在“校准位置”框列表中，输入相对于所选图形组件的本地原点的基准框值。6.在输送机长度框中，输入输送机的长度。“编译机制”按钮已启用。7.在“附着点”框中，设置“间距”和“计数”值。8.单击“添加”以创建新的附着点。9.单击编译机制，以编译机制。请参见第288页的编译机制。10.在布局浏览器中，在输送机机构上单击鼠标右键，然后选择“另存为库”。关闭工作站。11.构建新系统
GESPAC MPU-20H512工控控制卡件
In the tree structure, right-click Calibration, and then click Add Calibration to bring up the Create Calibration dialog box. 13. Complete the Create Calibration dialog box, and then click OK. 14. In the tree structure, right-click Dependency, and then click Add Dependency to bring up the Create Dependency dialog box. 15. Complete the Create Dependency dialog box, and then click OK. 16. If all nodes are valid, compile the mechanism, see Compiling a mechanism on page 288. Create Conveyor mechanism 1. Click Create Mechanism. The Mechanism Modeler opens in create mode. 2. In the Mechanism Model Name dialog box, enter a mechanism name. 3. From the Mechanism Type list, select Conveyor. 4. From the Selected Part list, select Par 5. In the Position of Calibration frame list, enter the base frame values relative to the local origin of the selected graphic component. 6. In the Conveyor length box, enter the length of the conveyor. The Compile Mechanism button is enabled. 7. In the Attachment Points box, set the Pitch and Count value. 8. Click Add to create new attachment points. 9. Click Compile Mechanism, to compile the mechanism. See Compiling a mechanism on page 288. 10. In the Layout browser, right-click the conveyor mechanism and select Save As Library. Close the station. 11. Build a new system
公司主营优势
应用行业
