GESPAC MPU-20H512工控控制卡件
GESPAC MPU-20H512从法线1创建直线。单击“曲面选择”。2.单击“直线到法线”以打开一个对话框。3.单击面以在“选择面”框中选择该面。4.在“长度”框中，指定直线的长度。5.（可选）选中“反转法线”复选框以反转线的方向。6.单击“创建”。提示！在进行测量之前，请确保选择适当的捕捉模式和选择级别。测量距离或角度1。单击要使用的测量类型：激活任何测量功能后，鼠标指针将变为标尺。2.在图形窗口中，选择要测量的点或对象。有关测量点的信息显示在输出窗口中。选择所有点后，结果将显示在输出窗口的测量选项卡中。3.可选地，重复步骤3以进行相同类型的新测量。提示！您还可以从测量工具栏激活和停用测量功能。要测量在图形窗口中选择的两点之间的“选择距离”。由在图形窗口中选择的三个点定义的点到点角度。要选择的第一个点是会聚点，然后在每条线上选择一个点。角度直径，GESPAC MPU-20H512圆由从图形窗口中选择的三个点定义。直径在图形窗口中选择的两个对象之间的最近距离。GESPAC MPU-20H512
GESPAC MPU-20H512工控控制卡件
Creating a line from normal 1. Click Surface Selection. 2. Click Line to Normal to bring up a dialog box. 3. Click on a face to select it in the Select Face box. 4. In the Length box, specify a length for the line. 5. Optionally, select the Invert Normal check box to invert the direction of the line. 6. Click Create. TIP! Make sure to select the appropriate snap mode and selection levels before making your measurements. Measuring distances or angles 1. Click the type of measurement you want to use: The mouse pointer will turn into a ruler when you have activated any of the measurement functions. 2. In the graphics window, select the points or objects to measure between. Information about the measuring points is displayed in the Output window. The results will be displayed in the Measurements tab in the Output window when all points have been selected. 3. Optionally, repeat step 3 for making a new measurement of the same type. TIP! You can also activate and deactivate the measurement functions from the measurement toolbar. To measure the Select distance between two points you select in the graphics window. Point to point angle defined by three points you select in the graphics window. The first point to select is the converging point, thereafter you shall select one point on each line. Angle diameter, with the circle defined by three points you select from the graphics window. Diameter closest distance between two objects you select in the graphics window.GESPAC MPU-20H512
公司主营优势
应用行业
