GESPAC GESCI0-1B检测板
GESPAC GESCI0-1B拉伸曲面或曲线1。从选择级别工具栏中，根据需要选择“曲面”或“曲线”。2.在图形窗口中，选择要拉伸的曲面或曲线。根据需要单击“挤出曲面”或“挤出曲线”。“挤出曲面或曲线”对话框将在建模浏览器下方打开。3.对于沿向量的拉伸，请填写值。对于沿曲线挤出，请选择“沿曲线挤出”选项。单击“曲线”框，然后在“图形”窗口中选择曲线。4.如果希望窗体显示为曲面模型，请清除“生成实体”复选框。5.单击“创建”。“挤出曲面或曲线”对话框“曲面或曲线表示要挤出的曲面或曲线。”。要选择曲面或曲线，请首先在框中单击，然后在图形窗口中选择曲面或曲面。沿向量挤出启用沿指定向量挤出。起点（mm）矢量的起点。到点（mm）矢量的终点。沿曲线挤出启用沿指定曲线挤出。GESPAC GESCI0-1B曲线表示用作扫掠路径的曲线。xx0600003076要选择曲线，请首先单击框，然后单击图形窗口中的曲线。生成实体选中此复选框可将拉伸形状转换为实体。
GESPAC GESCI0-1B检测板
Extruding a surface or curve 1. From the selection level toolbar, select Surface or Curve, as appropriate. 2. In the graphics window, select the surface or curve you wish to extrude. Click Extrude Surface or Extrude Curve, as appropriate. The Extrude Surface or Curve dialog box opens below the Modeling browser. 3. For extrusion along a vector, fill in the values. For extrusion along a curve, select the Extrude Along Curve option. Click the Curve box, and select the curve in the Graphics window. 4. If you wish the form to appear as a surface model, clear the Make Solid check box. 5. Click Create.The Extrude Surface or Curve dialog box Surface or Curve Denotes the surface or curve to be extruded. To select the surface or curve, first click in the box, then select the surface or curve in the graphics window. Extrude Along Vector Enables extrusion along a specified vector. From Point (mm) The start point of the vector. To Point (mm) The end point of the vector. Extrude Along Curve Enables extrusion along a specified curve. Curve Denotes the curve used as a sweep path. xx0600003076 To select the curve, first click the box, then the curve in the graphics window. Make Solid Select this check box to convert the extruded form into a solid.GESPAC GESCI0-1B
公司主营优势
应用行业
