GESPAC GESRAM-14C-9318内存板
GESPAC GESRAM-14C-9318参考选择与所有位置或点相关的参考坐标系。基准中心点（A）单击其中一个框，然后单击图形窗口中的中心点，将值传递到基准中心点框，或键入位置。中心点将是圆柱体的局部原点。方向如果对象应相对于参考坐标系旋转，请指定旋转。半径（B）指定圆柱体的半径。直径指定圆柱体的直径。高度（C）指定圆柱体的高度。参考选择与所有位置或点相关的参考坐标系。GESPAC GESRAM-14C-9318基准中心点（A）单击其中一个框，然后单击图形窗口中的中心点，将值传递到基准中心点框，或键入位置。中心点将是金字塔的局部原点。方向如果对象应相对于参考坐标系旋转，请指定旋转。中心到角点（B）键入位置，或在框中单击，然后在图形窗口中选择点。高度（C）指定棱锥体的高度。边数指定棱锥体的边数。最大边数为50。GESPAC GESRAM-14C-9318
GESPAC GESRAM-14C-9318内存板
Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the cylinder. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Radius (B) Specify the radius of the cylinder. Diameter Specify the diameter of the cylinder. Height (C) Specify the height of the cylinder.Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the pyramid. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Center to Corner Point (B) Either type the position, or click in the box and then select the point in the graphics window. Height (C) Specify the height of the pyramid. Number of Sides Specify the number of sides of the pyramid. The maximum number of sides is 50.GESPAC GESRAM-14C-9318
公司主营优势
应用行业
