GESPAC GESCIO-1电路板
GESPAC GESCIO-1参考选择与所有位置或点相关的参考坐标系。角点(A)该点将是长方体的局部原点。键入位置,或单击其中一个框,然后在图形窗口中选择该点。在XY平面的对角线上点(B)该点是角点,与本地原点成对角线。它设置局部坐标系的X和Y方向,以及沿这些轴的长方体尺寸。键入位置,或单击其中一个框,然后在图形窗口中选择点。指示点Z轴(C)该点是本地原点上方的角,它设置本地坐标系的Z方向,以及沿Z轴的长方体尺寸。键入位置,或单击其中一个框,然后在图形窗口中选择点。参考选择所有位置或点将关联的参考坐标系。基准中心点(GESPAC GESCIO-1A)单击其中一个框,然后单击图形窗口中的中心点,将值传递到基准中心点框,或键入位置。中心点将是圆锥体的局部原点。方向如果对象应相对于参考坐标系旋转,请指定旋转。半径(B)指定圆锥体的半径。直径指定圆锥体的直径。高度(C)指定圆锥体的高度。GESPAC GESCIO-1
GESPAC GESCIO-1电路板
Reference Select the Reference coordinate system to which all positions or points will be related. Corner Point (A) This point will be the local origin of the box. Either type the position, or click in one of the boxes and then select the point in the graphics window.oint on diagonal of XYplane (B) This point is the the corner, diagonal to the local origin. It sets the X and Y directions of the local coordinate system, as well as the dimension of the box along these axes. Either type the position, or click in one of the boxes and then select the point in the graphics window. Indication Point Z-axis (C) This point is the corner above the local origin, It sets the Z direction of the local coordinate system, as well as the dimension of the box along the Z axis. Either type the position, or click in one of the boxes and then select the point in the graphics window.Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the cone. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Radius (B) Specify the radius of the cone. Diameter Specify the diameter of the cone. Height (C) Specify the height of the cone.GESPAC GESCIO-1
公司主营优势
应用行业