Mitsubishi MR-J2S-70A伺服驱动器
Mitsubishi MR-J2S-70A直线传感器直线传感器通过起点、终点和半径定义直线。当激活信号为高时，传感器检测到与直线相交的物体。相交对象显示在“ClosestPart”属性中，相交部分上最接近线传感器起点的点显示在“ClosestPoint”属性中。发生交叉时，设置SensorOut输出信号。Start指定起点。终点指定终点。半径指定半径。SensedPart指定与线传感器相交的部分。如果多个部分相交，则会列出最接近起点的部分。SensedPoint指定相交零件上最接近起点的点。tive指定LineSensor是否处于活动状态。如果传感器与对象相交，Mitsubishi MR-J2S-70A则为SensorOut True。平面传感器平面传感器通过原点、轴1和轴2定义平面。当设置激活输入信号时，传感器检测与该平面相交的对象。相交对象显示在SensedPart属性中，当发生相交时，设置SensorOut输出信号。Mitsubishi MR-J2S-70A
Mitsubishi MR-J2S-70A伺服驱动器
LineSensor The LineSensor defines a line by the Start, End, and Radius. When an Active signal is high, the sensor detects objects that intersect the line. Intersecting objects are displayed in the ClosestPart property and the point on the intersecting part that is closest to the line sensors start point is displayed in the ClosestPoint property. When intersection occurs the SensorOut output signal is set.Start Specifies the start point. End Specifies the end point. Radius Specifies the radius. SensedPart Specifies the part that intersects the line sensor. If several parts intersect, then the one closest to theStart point is listed. SensedPoint Specifies the point on the intersecting part, closest to the Start point.ctive Specifies if the LineSensor is active or not. SensorOut True if the sensor intersects with an object.PlaneSensor The PlaneSensor defines a plane by Origin, Axis1, and Axis2. When the Active input signal is set the sensor detects objects that intersect this plane. Intersecting objects are displayed in the SensedPart property and when intersection occurs the SensorOut output signal is set.Mitsubishi MR-J2S-70A
公司主营优势
应用行业
