TRICONEX 3603B数字输出模块
TRICONEX 3603B表达式由数字文字（包括PI）、括号、数学运算符+、-、*、/、^（幂）和数学函数sin、cos、sqrt、atan、abs组成。任何其他字符串都被解释为变量，这些变量被添加为附加的财产。结果显示在结果中。表达式由数字文字（包括PI）、括号、数学运算符+、-、*、/、^（幂）和数学函数sin、cos、sqrt、atan、abs组成。任何其他字符串都被解释为变量，这些变量被添加为附加的财产。TRICONEX 3603B结果显示在result.Count脉冲输出次数中。信号描述执行设置为高（1）以脉冲输出计数次数。输出输出脉冲.StartTime指定第一个脉冲之前经过的时间。间隔指定脉冲之间的模拟时间。Repeat（重复）指定信号应重复脉冲还是仅脉冲一次。当前时间指定当前模拟时间。信号描述激活设置为True以激活计时器，设置为False以停用计时器。输出以指定的时间间隔发送脉冲。TRICONEX 3603B
TRICONEX 3603B
opWatch The StopWatch measures time during simulation (TotalTime). A new lap can be started by triggering the Lap input signal. LapTime shows the current lap time. The time is only measured when Active is set to 1. The times are reset when the input signal Reset is set. Parametric Primitives ParametricBox The ParametricBox generates a box with dimensions specified by length, width, and height. ParametricCircle The ParametricCircle generates a circle with a given radius. Properties Description TotalTime Specifies the accumulated time. LapTime Specifies the current lap time. AutoReset If true, TotalTime and LapTime will be set to 0 when the simulation starts. Signals Description Active Set to True to activate the stop watch, and False to deactivate it. Reset Resets Total time and Lap time when set to high. Lap Starts a new lap.zeX Specifies the length of the box in the X-axis direction. SizeY Specifies the length of the box in the Y-axis direction. SizeZ Specifies the length of the box in the Z-axis direction GeneratedPart Specifies the generated part. KeepGeometry False to remove the geometry data from the generated part. This can make other components such as Source execute faster. Signals Description Update Set to high (1) to update the generated part.TRICONEX 3603B
公司主营优势
应用行业
