WOODWARD 5501-467数字速度传感器
确保要连接的电脑上的网络设置正确。根据运行的操作系统，请参阅电脑的系统文档。PC必须设置为“自动获取IP地址”，或按照引导应用程序中的服务PC信息进行设置。2.使用交付的带RJ45连接器的5类以太网交叉引导电缆。电缆在RobotWare产品盒中交付。3.将引导电缆连接到电脑的网络端口xx0400000844•A：网络端口网络端口的位置可能因电脑型号而异。4.将引导电缆连接到计算机单元上的服务端口。本主题介绍连接到控制器的PC的网络设置，这是联机工作的先决条件。您可以通过以下方式通过以太网将PC连接到控制器：•本地网络连接•服务端口连接•远程网络连接
Make sure the network setting on the PC to
be connected is correct.
Refer to the system documentation for
your PC, depending on the operative
system you are running.
The PC must be set to “Obtain an IP
address automatically” or set as described
in Service PC Information in the Boot
Application.
2. Use the delivered category 5 Ethernet
crossover boot cable with RJ45
connectors.
The cable is delivered in the RobotWare
product box.
3. Connect the boot cable to the network port
of your PC.
xx0400000844
• A: network port
The placement of the network port may
vary depending on the PC model.
4. Connect the boot cable to the service port
on the computer unit.This topic describes the network settings for a PC connected to a controller, which is a
prerequisite for working online.
You can connect the PC to the controller through an Ethernet network in the following ways:
• Local network connection
• Service port connection
• Remote network connection
