ABB YTE102C YT213001-BC伺服电源模块
事件通过定义满足特定触发条件时执行的操作来增强模拟。您可以使用事件：•在模拟材料搬运时，将一个物体连接到另一个物体上，例如，将工件连接到夹具上，请参见第56页的“连接和分离物体”。•设置信号，例如，当模拟由控制器以外的设备设置的信号时，请参见第131页的模拟I/O信号。•启动或停止过程计时器，参见第133页测量过程时间。用于创建新事件的创建新事件向导从事件管理器启动，请参阅第298页的事件管理器。先决条件在创建事件之前，请确保工作站包含计划用作触发器或受操作影响的所有信号和对象。过程模拟I/O信号时，您可以创建在满足指定触发条件时设置信号值的事件，也可以手动设置信号值。
Events enhance your simulations by defining actions that are carried out when specific trigger
conditions are fulfilled. You can use events to:
• Attach one object to another, for example, a work piece to a gripper when simulating
material handling, see Attaching and detaching objects on page 56.
• Set signals, for example, when simulating signals set by equipment other than the
controller, see Simulating I/O signals on page 131.
• Start or stop the process timer, see Measuring process time on page 133.
Used for creating new events, the Create New Event Wizard is launched from the Event
manager, see Event Manager on page 298.
Prerequisites
Before creating the event, make sure that the station contains all signals and objects that are
planned to be used as triggers or affected by the action.Procedures
When simulating I/O signals you can either create events that set signal values when specified
trigger conditions are fulfilled, or you can set signal values manually.
