GE 531X111PSHARG1燃机卡系列模块
将目标法线设置为曲面将目标方向设置为曲面法线就是使其垂直于曲面。目标可以以两种不同的方式垂直于曲面定向：•整个曲面可以用作法线的参考。目标将作为曲面上最近点的法线定向。整个曲面是默认曲面参考。•曲面上的特定点可以用作法线的参考。无论曲面上最近点的法线是否具有另一个方向，目标都将作为该点的法线定向。没有几何体（例如.jt文件）导入的对象只能引用曲面上的特定点。有关步骤，请参见第420页的“将法线设置为曲面”。对齐目标方向的效果在下图中，通过将目标围绕X轴的方向与锁定的Z轴对齐，组织了先前与表面垂直但X轴和Y轴随机定向的目标。路径中的一个目标已用作参考。
Setting a target normal to surface
To set a target orientation normal to a surface is to make it perpendicular to the surface. The
target can be oriented normal to the surface in two different ways:
• The entire surface can be used as a reference for the normal. The target will be oriented
as the normal to the closest point at the surface. The entire surface is the default surface
reference.
• A specific point on the surface can be used as the reference for the normal. The target
will be orientated as the normal to this point, regardless of whether the normal to the
closest point at the surface has another orientation.
Objects imported without geometry (for example, .jt files) can only refer to specific points on
the surface.
For a procedure, see Set Normal to Surface on page 420.
Effect of align target orientation
In the picture below, the targets, which were previously orientated with the Z axis normal to
the surface but with the X and Y axes orientated randomly, have been organized by aligning
the targets’ orientation around the X axis with the Z axis locked. One of the targets in the path
has been used as reference.
