RELIANCE S-D4012系统模块
确保连接的浏览器设置（例如，控制器地址没有代理服务器）正常，并且可以从PC访问控制器。检查连接服务器上是否启用了TCP/IP转发。有关更多信息，请参阅System 800xA Network Configuration（系统800xA网络配置）手册（3BSE034463*）中描述的配置。如果一切正常，将显示登录窗口。要打开WebServer界面，请确保在Internet Explorer的LAN设置中禁用了自动检测设置。默认密码为ac800m。在第一次可能的时候，将其替换为符合组织安全策略的密码。无法替换默认密码会使系统容易受到未经授权的访问。有关建立密码安全方案的建议，请参阅System 800xA Administration and Security（3BSE037410*）中的密码安全主题。
Make sure that the browser settings
for the connection (for example no proxy server for the controller address) is OK
and that the controller is accessible from the PC. Check that TCP/IP forwarding is
enabled on Connectivity Servers.
For more information see the configurations described in System 800xA Network
Configuration manual (3BSE034463*). If everything is correct, the login window
appears.
To open the WebServer interface, ensure that Automatically detect settings is
disabled in the LAN settings of the Internet Explorer.The default password is ac800m. Replace this with a password that conforms
with your organization's security policy at the first possible opportunity. Failure
to replace the default password makes the system susceptible to unauthorized
access.
Refer to the Password Security topic in System 800xA Administration and
Security (3BSE037410*) for recommendations on establishing a password
security scheme.
