LAETUS LLS570-05激光扫描仪
请注意，PROFIBUS从设备还必须支持总线参数的在线更改。否则，特定从属单元的连接将短时间断开。如果从设备配置发生变化，并且从设备不支持HCIR（运行中的热配置），则停止与特定PROFIBUS从设备的通信。PROFIBUS主参数的自动计算在下载过程中会计算PROFIBUS主参数。根据所选波特率，将重新计算设置。计算使用实际值作为输入。基于配置的从属设备及其输入和输出数据，它计算新值。如果参数值已更改，则将在消息窗格和编译摘要窗口中显示
Please note that also the PROFIBUS slave unit has to support the online change
of bus parameters. Otherwise the connection for the specific slave unit will be
disconnected for a short time.
The communication to a specific PROFIBUS slave unit is stopped if the slave
configuration is changed and the slave doesn’t support HCIR (Hot Configuration
in Run).Automatic Calculation of PROFIBUS Master Parameters
During download a calculation of the PROFIBUS master parameters takes place.
Depending on the selected baudrate the settings will be recalculated. The calculation uses the actual values as an input. Based on the configured slaves with
their input and output data it calculates the new values.
If the value of a parameter is changed it will be indicated in the message pane and
the compilation summary window
