YAMATAKE EST0240Z05WBX00触摸显示屏工控
用Control Builder M配置的位置必须符合硬件单元本身配置的PROFIBUS地址。硬件单元上的配置通常通过DIP开关完成。如果装置没有像PROFIBUS PA设备一样的DIP开关，则可以使用第77.3页SetAddress中描述的Web界面通过PROFIBUS设置其地址。如果模块应设置为冗余，请选中启用冗余模式。备份从属设备的位置将自动计算并显示（另请参阅第28页的从属冗余）。4.单击“插入”按钮应用当前更改。5.单击“关闭”关闭对话框或继续插入更多单元。硬件单元现在包含在树中。树中显示的图标取决于是否配置了冗余。对于冗余配置单元，备份模块的位置显示在括号内。如果FCI应在冗余模式下工作，则需要在硬件的设置选项卡中配置冗余
The position configured with Control Builder M has to fit to the PROFIBUS
address configured on the hardware unit itself. The configuration on the hardware
unit is typically done via DIP switches. If the unit does not have a DIP switch like
a PROFIBUS PA device it is possible to set its address via the PROFIBUS using
the Web interface described in SetAddress on page 77.3. If the module shall be set redundant check Enable redundant mode. The
position for the backup slave will be calculated automatically and displayed
(see also Slave Redundancy on page 28).
4. Click Insert button to apply the current changes.
5. Click Close to close the dialog or proceed inserting further units.The hardware unit is now included in the tree. The icon shown in the tree
depends on if redundancy is configured or not. For a redundant configured unit
the position for the backup module is presented within parenthesis.If the FCI shall work in redundant mode, it is needed to configure redundancy in
the settings tab of the hardware
