REOTRON 567LH-DP24驱动器模块
删除主机冗余如果CI854A已配置并以冗余模式运行，则可以删除冗余。1.右键单击要删除冗余的CI854A，然后选择冗余>删除备份。2.图标变为单个图标，文本中的备份位置被删除。配置PROFIBUS主单元硬件编辑器通过双击硬件单元或从CI854上下文菜单中选择编辑器打开硬件编辑器。硬件编辑器包含以下选项卡：设置、连接和设备状态。在Control Builder的离线模式下，M单元B始终作为备份单元显示，与当前状态无关。因此，B单元将始终作为备份删除。如果您下载并联机，如果单元B作为主要单元，则CI854A可以执行故障切换。单元A成为主要单元，之后单元B将被删除。
Delete Redundancy for Master Unit
If the CI854A is already configured and running in redundant mode you can delete
redundancy.
1. Right-click on the CI854A you want to delete redundancy for and select
Redundancy > Delete Backup.
2. The icon changes to the single icon and the position for the backup is deleted in
the text.
Configure the PROFIBUS Master Unit
HW Editor
Open the HW editor via double-click on the hardware unit or choose Editor from the
CI854 context menu. The HW editor contains the following tabs: Settings,
Connections and Unit Status.
In the offline mode of Control Builder M unit B is always presented as the
backup unit independent of the current state. Therefore always unit B will be
deleted as backup. If you download and go online a failover may be performed by
CI854A if unit B acts as primary. Unit A gets primary and afterwards unit B will
get deleted.
