ABB HC800控制处理器模块
插入PROFIBUS主单元要插入新的CI854/CI854A PROFIBUS DP-V1主单元，请按照说明进行操作。1.右键单击要插入CI854/CI854A的控制器，然后选择插入单元。“插入单位”对话框弹出。在“连接的库”下展开CI854的库，然后选择CI854硬件类型。3.在显示的对话框中选择硬件单元的位置。默认情况下选择第一个可用位置。如果需要其他位置，请单击列表框以显示可用位置并选择所需位置。4.如果模块应设置为冗余，请检查启用冗余模式。这将释放备份单元位置对话框。选择备份单元的位置。5.单击“插入”按钮应用当前更改。6.单击“关闭”关闭对话框或继续插入更多单元。7.硬件单元现在包含在树中。树中显示的图标取决于是否配置了冗余。对于冗余配置单元，备份模块的位置显示在括号内。
Insert PROFIBUS Master Unit
To insert a new CI854/CI854A PROFIBUS DP-V1 master unit proceed as
described.
1. Right-click on the controller you want to insert the CI854/CI854A and select
Insert Unit. The Insert Unit dialog pops up.2. Expand the library for CI854 under Connected Libraries and select the CI854
hardware type.
3. Select a position for the hardware unit in the dialog box displayed. The first
available position is chosen by default. If another position is desired, click the
list box to display available positions and select the desired one.
4. If the module shall be set redundant check Enable redundant mode. This
releases the dialog box for the position of the backup unit. Select a position for
the backup unit.
5. Click Insert button to apply the current changes.
6. Click Close to close the dialog or proceed inserting further units.
7. The hardware unit is now included in the tree. The icon shown in the tree
depends on if redundancy is configured or not. For a redundant configured unit
the position for the backup module is presented within parenthesis.
