HIMA LM002_MAX 985020002模块框架
被另一个主机从环中取出，检查系统配置警告事件低PROFIBUS上的另一个主设备已禁用CI854/CI854A。检查系统配置。致命介质访问错误警告事件低PROFIBUS的下层无法访问介质。检查CI854/CI854A（电缆、接头）的连接。这也可能是CI854/CI854A本身的硬件故障。4 16#0000001 0致命硬件错误警告事件低检测到致命硬件错误。更换CI854/CI854A。5 16#0000002 0所有从设备故障报警介质检查PROFIBUS连接（电缆、CI854/CI854A处的连接器）。原因也可能是CI854/CI854A的硬件错误。如果使用冗余CI854A，则此错误会导致冗余切换。
Taken out of ring
by another
master, check
system conf.
Warnin
g
Event Low Another master on the PROFIBUS
has disabled the CI854/CI854A.
Check the system configuration.Fatal medium
access error
Warnin
g
Event Low The lower layer of the PROFIBUS
cannot access the medium. Check
the connection of the
CI854/CI854A (cable, connectors).
This can also be a hardware
failure on the CI854/CI854A itself.
4 16#0000001
0
Fatal hardware
error
Warnin
g
Event Low A fatal hardware error has been
detected. Replace the
CI854/CI854A.
5 16#0000002
0
All slaves failed Warnin
g
Alarm Mediu
m
Check the PROFIBUS
connections (cable, connector at
the CI854/CI854A). The reason
can also be a hardware error of
the CI854/CI854A. If the CI854A is
used redundant, this error leads to
a redundancy switchover.
