Vibro-meter 200-510-070-113 200-510-111-034 VM600 MPC4
可以启用或禁用线路冗余监控。默认设置为禁用。启用通过CI854/CI854A设置中的参数“线路冗余”完成。如果启用了线路冗余,则在发生故障的情况下,特定线路将显示警告“PROFIBUS上无活动”,例如PROFIBUS电缆上有故障。请启用线路冗余监控,如果使用了符合PNO冗余规范的冗余从设备和/或非冗余从设备提供了线路冗余接口和/或只有一个PROFIBUS接口的非冗余从机通过RLM01连接到CI854/CI854A。线路冗余的启用不会影响CI854/CIL854A上LED RxA和RxB的指示。
The monitoring of the line redundancy can be enabled or disabled. The default is
disabled. The enabling is done via the parameter "Line redundancy" in the settings for CI854/CI854A. If the line redundancy is enabled the warning "No activity on
PROFIBUS" will be indicated for the specific line in the case of a failure, for
example if there is a fault on the PROFIBUS cable.
Please enable the monitoring of line redundancy, if
– redundant slaves according to the PNO redundancy specification are used
and/or
– non-redundant slaves provide a line redundant interface and/or
– non-redundant slaves with only one PROFIBUS interface are connected to
the CI854/CI854A with a RLM01 The enabling of line redundancy does not affect the indication of the LEDs RxA
and RxB on CI854/CI854A.