FANUC A02B-0319-B502触摸屏模块
电源此屏幕（从主屏幕中选择）允许用户在VMIVME-7750上配置节能选项。仅当启用“CPU节流下降阈值”时，才会显示节流和CPU节流回滞后选项。默认设置为“禁用”。CPU节流回滞后的默认值为10C。限制的默认值为50%。引导优先级由堆栈顺序决定，顶部优先级最高，底部最低。可以通过突出显示设备并使用<+>或<->键将其移动到堆栈中所需的顺序来修改顺序。通过突出显示特定设备并按下，可以禁用设备的引导。展开或折叠设备，旁边带有+或-。引导优先级由堆栈顺序决定，顶部优先级最高，底部最低。可以通过突出显示设备并使用<+>或<->键将其移动到堆栈中所需的顺序来修改顺序。通过突出显示特定设备并按，可以禁用该设备的引导功能。展开或折叠设备时，旁边带有+或-。
Power
This screen, selected from the Main screen, allows the user to configure power saving
options on the VMIVME-7750.The Throttling and CPU Throttling back hysteresis selections will only be shown if
“CPU Throttling Down Threshold” is enabled. The default is Disabled. The default for
CPU Throttling back hysteresis is 10C. The default for Throttling is 50% The Boot priority is determined by the stack order, with the top having the highest
priority and the bottom the least. The order can be modified by highlighting a device
and, using the <+> or <-> keys, moving it to the desired order in the stack. A device
can be boot disabled by highlighting the particular device and pressing
