FANUC A02B-0283-B801伺服驱动器
高级芯片集控制选择高级芯片集控件将打开下面的菜单。使用此菜单更改芯片组寄存器中的值,以优化系统性能。视频引导类型选择“Onboard Video”(车载视频)以启用车载视频控制器作为引导显示设备。选择“禁用车载视频”以禁用车载视频控制器。视频格式选择为CRT、LCD或CRT_LCD。默认为CRT。默认主视频适配器选择“PCI”以使PCI视频卡(如果已安装)用于引导显示设备。不要选择“AGP”,因为VMIVME-7750不支持AGP。图形孔径选择AGP视频的图形孔径大小装置选项包括:4MB、8MB、16MB、32MB、64MB、128MB或256MB。默认值为64MB。启用内存间隙如果已启用,请关闭系统RAM以释放地址空间,以便与选项卡一起使用。将在系统RAM中创建128KB的常规内存间隙(从512KB开始)或1MB的扩展内存间隙(以15MB开始)。选项为禁用、常规或扩展。默认设置为禁用
Advanced Chipset Control
Selecting Advanced Chipset Control opens the menu below. Use this menu to change
the values in the chipset register for optimizing your system’s performance.Video Boot Type
Select “Onboard Video’ to enable the onboard video controller as the boot display
device. Select “Disable Onboard Video’ to disable the onboard video controller.
Video Format
Selections are CRT, LCD or CRT_LCD. The default is CRT.Default Primary Video Adapter
Select ‘PCI’ to have a PCI video card, if installed, used for the boot display device.
Do not select ‘AGP’ as the VMIVME-7750 does not support AGP.
Graphics Aperture
Select the size of the graphics aperture for the AGP video device. The options are:
4MB, 8MB, 16MB, 32MB, 64MB, 128MB or 256MB. The default is 64MB.
Enable Memory Gap
If enabled, turn system RAM off to free address space for use with an option card.
Either a 128KB conventional memory gap, starting at 512KB, or a 1MB extended
memory gap, starting at 15MB, will be created in the system RAM. The options are
Disabled, Conventional or Extended. The default is Disabled