EMERSON KJ1710X1-BA1单端口光纤交换机
有关BAR0的更多信息，请参阅第56页的表3-2“PCI配置空间寄存器”。闪存磁盘VMIVME-7750具有可选的板载紧凑型闪存大容量存储系统，容量高达512 Mbyte。该闪存磁盘在用户看来是一个智能ATA（IDE）磁盘驱动器，具有与“旋转介质”IDE硬盘驱动器相同的功能和功能。VMIVME-7750 BIOS包括一个选项，允许板从闪存磁盘启动。配置闪存磁盘作为辅助IDE总线主设备驻留在VMIVME-7750上（辅助IDE总线从设备不可分配）。Phoenix BIOS“STANDARD CMOS SETUP”（标准CMOS设置）屏幕中的默认设置为“AUTO”（自动）设置。在Phoenix BIOS的“外围设置”屏幕中，必须启用辅助PCI IDE接口，闪存盘才能正常工作。更多详情请参考附录C。
Please refer to Table 3-2, “PCI Configuration Space Registers,” on page 56 for more
information concerning BAR0.Flash Disk
The VMIVME-7750 features an optional on-board Compact Flash mass storage system
with a capacity of up to 512 Mbyte. This Flash Disk appears to the user as an
intelligent ATA (IDE) disk drive with the same functionality and capabilities as a
“rotating media” IDE hard drive. The VMIVME-7750 BIOS includes an option to
allow the board to boot from the Flash Disk.
Configuration
The Flash Disk resides on the VMIVME-7750 as the secondary IDE bus master device
(the secondary IDE bus slave device is not assignable). The default setting in the
Phoenix BIOS ‘STANDARD CMOS SETUP’ screen is the ‘AUTO’ setting. In the
Phoenix BIOS ‘PERIPHERAL SETUP’ screen, the secondary PCI IDE interface must be
enabled for the Flash Disk to be functional. Refer to Appendix C for additional details.
