EMERSON KJ1501X1-BC3系统电源
有关MOTLoad操作和功能的更多信息，请参阅MOTLoad固件包用户手册。6.4.2帮助每个MOTLoad固件包都有一个广泛的、特定于产品的帮助工具，可以通过帮助命令访问。用户可以在MOTLoad命令行输入help，以显示所有可用测试和实用程序的完整列表。示例MVME7100>help要获得特定测试或实用程序的帮助，用户可以在MOTLoad提示符下输入以下内容：help help命令还支持有限形式的模式匹配。请参阅帮助命令页。固件设置以下部分提供了有关MOTLoad配置的MVME7100 VME总线接口设置的其他信息。少数VME设置由硬件跳线控制，而大多数VME设置则由固件命令管理。MOTLoad中的VME设置通过使用全局环境变量（GEV）保存。配置GEV仅在上电复位时执行。因此，如果VME配置更改是通过vmeCfg实现的，则必须对要在MOTLoad中实现的更改进行板重置。
For more information on MOTLoad operation and function, refer to the MOTLoad Firmware
Package User’s Manual.
6.4.2 Help
Each MOTLoad firmware package has an extensive, product-specific help facility that can
be accessed through the help command. The user can enter help at the MOTLoad
command line to display a complete listing of all available tests and utilities.
Example
MVME7100> help
For help with a specific test or utility the user can enter the following at the MOTLoad
prompt:
help The help command also supports a limited form of pattern matching. Refer to the help
command page.Firmware Settings
The following sections provide additional information pertaining to the MVME7100 VME
bus interface settings as configured by MOTLoad. A few VME settings are controlled by
hardware jumpers while the majority of the VME settings are managed by the firmware
command VME settings in MOTLoad are preserved through the use of Global Environment
Variables (GEVs). Configuration GEVs are executed only at power-on reset.
Therefore, if VME configuration changes are implemented through vmeCfg and
board reset must be effected for the changes to be implemented in MOTLoad.
