ABB XVC772A102 3BHE032285R0102控制板
控制台重定向在加载操作系统后启用控制台重定向。选项关闭或打开。默认设置为关闭。从主菜单中选择高级将显示下面显示的屏幕。已安装O/S使用此功能选择要与系统一起使用的操作系统。重置配置数据如果要清除扩展系统配置数据，请选择“是”。默认值为无。启用缓存内存可提高处理器速度。当CPU请求数据时，系统将请求的数据从主DRAM传输到缓存存储器，在CPU处理之前，缓存存储器存储在缓存存储器中。如果需要，请选择此菜单以配置I/O设备。大型磁盘访问模式大型磁盘访问方式的选项为：Unix Novell NetWare或其他。如果正在安装新软件且驱动器失败，请更改此选择并重试。不同的操作系统需要不同的驱动几何图形表示。默认值为其他。
Console Redirection After POST This enables console redirection after the operating system has loaded. The options are OFF or ON. The default setting is OFF.Advanced Menu Selecting Advanced from the Main menu will display the screen shown below Installed O/S Use this feature to select the operating system to use with your system. Reset Configuration Data Select Yes if you want to clear the extended system configuration data. The default is No. Cache Memory Enabling the cache memory enhances the speed of the processor. When the CPU requests data, the system transfers the requested data from the main DRAM into the cache memory where it is stored until processed by the CPU. The default is Enabled.I/O Device Configuration Select this menu to configure your I/O devices, if required.Large Disk Access Mode The options for the Large Disk Access Mode are: UNIX Novell Netware or Other. If you are installing new software and the drive fails, change this selection and try again. Different operating systems require different representations of drive geometries. The default is Other.
