ABB 3BUS208720-001模拟量进口伺服驱动器
维护打印不建议用户级维修。本手册中的图纸和图表仅供参考。简介VMIVME-7740 PC/AT兼容VMEbus控制器的I/O端口有多个连接器。图A-1显示了VMIVME-7740上接头的位置。在可能的情况下，VMIVME-7740使用任何台式PC的典型连接器和引脚。这确保了与各种系统的最大兼容性。本附录中的连接器图通常以自然方向显示，控制器板安装在VMEbus机箱中。视频连接器引脚（J3）视频端口使用标准高密度D15 SVGA连接器。图A-3说明了引脚。串行连接器引脚（P3）每个标准RS-232串行端口连接器都是一个微型D9公插头，如图A-4所示。可提供用于将标准D9串行外围设备连接到板的适配器。有关订购信息，请参阅产品规格表。
Maintenance Prints User level repairs are not recommended. The drawings and diagrams in this manual are for reference purposes only.Introduction The VMIVME-7740 PC/AT-Compatible VMEbus Controller has several connectors for its I/O ports. Figure A-1 shows the locations of the connectors on the VMIVME-7740. Wherever possible, the VMIVME-7740 uses connectors and pinouts typical for any desktop PC. This ensures maximum compatibility with a variety of systems. Connector diagrams in this appendix are generally shown in a natural orientation with the controller board mounted in a VMEbus chassis.Video Connector Pinout (J3) The video port uses a standard high-density D15 SVGA connector. Figure A-3 illustrates the pinout.Serial Connector Pinout (P3) Each standard RS-232 serial port connector is a Microminiature D9 male as shown in the drawing in Figure A-4. Adapters to connect standard D9 serial peripherals to the board are available. Please refer to the product specification sheet for ordering information.
