RELIANCE 800082-1R电力模块
ivide错误与实模式01相同1调试单步与实模式02相同2 NMI存储器奇偶校验错误，VMEbus中断与实模式相同（必须在BIOS设置中启用）03 3调试断点与实模式一样04 4 ALU溢出与实模式一致05 5打印屏幕阵列边界检查06 6无效操作代码07 7设备不可用08 8检测到IRQ0计时器滴答双异常09 9 IRQ1键盘输入协处理器段溢出0A 10 IRQ2 BIOS保留无效任务状态段0B 11 IRQ3 COM2串行I/O段不存在0C 12 IRQ4 COM1串行I/O堆栈段超限0D 13 IRQ5板载16位定时器与实模式相同0E 14 IRQ6软盘控制器页面故障0F 15 IRQ7 LPT1并行I/O未分配PCI中断外围组件互连（PCI）本地总线上的中断是可选的，定义为“级别敏感”，断言为低（负真），使用开放漏极输出驱动器。中断线的断言和取消断言，
ivide Error Same as Real Mode 01 1 Debug Single Step Same as Real Mode 02 2 NMI Memory Parity Error, VMEbus Interrupts Same as Real Mode (Must be enabled in BIOS Setup) 03 3 Debug Breakpoint Same as Real Mode 04 4 ALU Overflow Same as Real Mode 05 5 Print Screen Array Bounds Check 06 6 Invalid OpCode 07 7 Device Not Available 08 8 IRQ0 Timer Tick Double Exception Detected 09 9 IRQ1 Keyboard Input Coprocessor Segment Overrun 0A 10 IRQ2 BIOS Reserved Invalid Task State Segment 0B 11 IRQ3 COM2 Serial I/O Segment Not Present 0C 12 IRQ4 COM1 Serial I/O Stack Segment Overrun 0D 13 IRQ5 Onboard 16bit Timers Same as Real Mode 0E 14 IRQ6 Floppy Disk Controller Page Fault 0F 15 IRQ7 LPT1 Parallel I/O Unassigned PCI Interrupts Interrupts on Peripheral Component Interconnect (PCI) Local Bus are optional and defined as “level sensitive,” asserted low (negative true), using open drain output drivers. The assertion and de-assertion of an interrupt line,
