RELIANCE 86466-74S整流器组
VMIVME-7740在板上具有可选的闪存磁盘。有关设置的详细信息，请参阅第4章。7.如果安装了外部驱动器模块，则必须运行BIOS设置程序来配置驱动器类型。请参阅附录C以正确配置系统。如果存在驱动模块，请根据制造商的说明安装操作系统。有关在操作系统安装期间安装VMIVME-7740外围驱动程序软件的说明，请参阅附录B。BIOS设置VMIVME-7740有一个板载BIOS设置程序，可控制许多配置选项。这些选项保存在一个特殊的非易失性、电池支持的存储芯片中，统称为电路板的“CMOS配置”。CMOS配置控制了从通电开始硬件行为的许多细节。VMIVME-7740出厂时未配置CMOS硬盘。必须运行BIOS设置程序来配置连接的特定驱动器。VMIVME-7740 BIOS设置程序的详细信息包含在附录C中
The VMIVME-7740 features an optional Flash Disk on the board. Refer to Chapter 4 for set up details. 7. If an external drive module is installed, the BIOS Setup program must be run to configure the drive types. See Appendix C to properly configure the system.f a drive module is present, install the operating system according to the manufacturer’s instructions. See Appendix B for instructions on installing VMIVME-7740 peripheral driver software during operating system installation. BIOS Setup The VMIVME-7740 has an on-board BIOS Setup program that controls many configuration options. These options are saved in a special nonvolatile, battery-backed memory chip and are collectively referred to as the board’s “CMOS configuration.” The CMOS configuration controls many details concerning the behavior of the hardware from the moment power is applied. The VMIVME-7740 is shipped from the factory with no hard drives configured in CMOS. The BIOS Setup program must be run to configure the specific drives attached. Details of the VMIVME-7740 BIOS setup program are included in Appendix C
