GE DS200CPCAG1A控制主板卡件
示例：1。从PQM中读取正3相实际功率值：2。按照上述方法：DATA VALUE=（004F×216）+35D1十六进制=5177344+13777转换为十进制=5191121小数未设置高阶寄存器的最高有效位，因此DATA VALUE为计算值。将单位和比例参数应用于数据值，我们将数据值乘以0.01 kW。因此，从内存映射中读取的三相实际功率的合成值为51911.21 kW。3。从PQM中读取负3相实际功率值：按照上述方法：DATA value=（FF3A×216）+EA7B十六进制=（65338×216）+60027转换为十进制=4282051195十进制5。设置了高阶寄存器的最高有效位，因此DATA VALUE计算为：将单位和比例参数应用于DATA VALUE，我们将DATA VALUE乘以0.01 kW。因此，从内存映射中读取的三相实际功率的合成值为–129161.01 kW。
EXAMPLE: 1. Reading a positive 3 Phase Real Power actual value from the PQM: 2. Following the method described above: DATA VALUE = (004F × 216) + 35D1hexadecimal = 5177344 + 13777converted to decimal = 5191121decimal The most significant bit of the High Order register is not set, therefore the DATA VALUE is as calculated. Applying the Units & Scale parameters to the DATA VALUE, we multiply the DATA VALUE by 0.01 kW. Therefore the resultant value of 3 Phase Real Power as read from the memory map is 51911.21 kW. 3. Reading a negative 3 Phase Real Power actual value from the PQM:Following the method described above: DATA VALUE = (FF3A × 216) + EA7Bhexadecimal = (65338 × 216) + 60027converted to decimal = 4282051195decimal 5. The most significant bit of the High Order register is set, therefore the DATA VALUE is calculated as:Applying the Units & Scale parameters to the DATA VALUE, we multiply the DATA VALUE by 0.01 kW. Therefore the resultant value of 3 Phase Real Power as read from the memory map is –129161.01 kW.
