GE DS200PCCAG6ACB Pcb电路板
在存储器映射的其余部分中分离的寄存器数据可以重新映射到用户可定义寄存器区域中的相邻寄存器地址。这是通过写入用户可定义的寄存器索引区域中的寄存器地址来实现的。这允许提高数据吞吐量，并且可以消除对多个读取命令序列的需要。例如，如果需要从PQM读取相位A电流（寄存器地址0220H）和相位A功率因数（寄存器地址02DDH）的值，则其地址可以重新映射如下：1。使用功能代码06或16将0220H写入地址0180H（用户可定义寄存器索引0000）。2.使用功能代码06或16将02DDH写入地址0181H（用户可定义寄存器索引0001）。读取寄存器0100H（用户定义寄存器0000）和0101H（用户可定义寄存器0001）（功能代码03或04）将返回A相电流和A相功率因数。注意：*数据类型取决于命令操作代码。**任何有效的实际值或设置点地址。***最大设定点值表示“OFF”。***最小设定点值代表“OFF””。*****最大设定值表示“无限制”。******仅适用于带VFD显示的旧版本
Register data that is separated in the rest of the memory map may be remapped to adjacent register addresses in the User Definable Registers area. This is accomplished by writing to register addresses in the User Definable Register Index area. This allows for improved throughput of data and can eliminate the need for multiple read command sequences. For example, if the values of Phase A Current (register address 0220H) and Phase A Power Factor (register address 02DDH) are required to be read from a PQM, their addresses may be remapped as follows: 1. Write 0220H to address 0180H (User Definable Register Index 0000) using function code 06 or 16. 2. Write 02DDH to address 0181H (User Definable Register Index 0001) using function code 06 or 16. A read (function code 03 or 04) of registers 0100H (User Definable Register 0000) and 0101H (User Definable Register 0001) will return the Phase A Current and Phase A Power Factor. Notes:* Data type depends on the Command Operation Code.** Any valid Actual Values or Setpoints address. *** Maximum Setpoint value represents “OFF”.**** Minimum Setpoint value represents “OFF”. ***** Maximum Setpoint value represents “UNLIMITED”.****** Applicable to older revisions with VFD display only
