GE DS200TBQCG1ABB模拟输入板
选择“忽略”。接下来将显示以下消息。Z再次选择“忽略”。EnerVista PQM设置软件将擦除闪存并将正确的固件加载到仪表中。如果固件升级过程中断，PQM中的波特率可能默认为9600波特。如果上述步骤未成功，则EnerVista PQM设置程序中的波特率可能不再与PQM波特率匹配。将EnerVista PQM设置程序中的通信波特率设置更改为9600波特，并重复上述过程。将保存的设置点加载到PQM Z中选择文件>打开菜单项。Z选择包含要加载到PQM中的设定点的文件，然后单击确定。Z选择文件>财产菜单项，更改设定点文件的文件版本，以匹配PQM的固件版本。
Select "Ignore". The following message will appear next. Z Select "Ignore" again. The EnerVista PQM Setup software will erase the flash and load correct firmware into meter. If the firmware upgrade process is interrupted there is a possibility that the baud rate in the PQM will default to 9600 Baud. If the above steps do not succeed then the baud rate in the EnerVista PQM Setup program may no longer match the PQM baud rate. Change the communication baud rate setting in the EnerVista PQM Setup program to 9600 Baud and repeat the above process.Loading Saved Setpoints into the PQM Z Select the File > Open menu item. Z Select the file containing the setpoints to be loaded into the PQM and click OK. Z Select the File > Properties menu item and change the file version of the setpoint file to match the firmware version of the PQM.
