ABB DSTA001B 3BSE018316R1模拟模块
CLEAR PULSE INPUT VALUES（清除脉冲输入值）：输入YES（是）以清除实际值子组A1 METERING\PULSE INPUT（A1测量\脉冲输入）下的所有脉冲输入值。发出此命令后，与此消息相关的时间和日期将更新为当前日期。•清除事件记录：输入是清除事件记录中的所有事件。这将从事件记录中删除所有以前的事件，并创建一个CLEAR events事件作为新事件编号1。只有在S1 PQM SETUP（设置）\ Event Recorder（事件记录器）\ EVEN Recorder OPERATION（事件记录器操作）中启用时，才能清除事件记录器。•加载出厂默认设定值：当PQM出厂时，所有设定值将设置为出厂默认值。这些设置显示在设定点消息参考图中。要将PQM返回到这些已知设定点，选择YES（是），并在显示此信息时按键。然后，显示屏将警告所有设定点将丢失，并询问是否继续。再次选择YES（是）以重新加载设定点。在更换PQM时，最好先加载出厂默认值，以确保所有设置默认为合理值。
CLEAR PULSE INPUT VALUES: Enter YES to clear all the pulse input values under the actual values subgroup A1 METERING \ PULSE INPUT. The time and date associated with this message will be updated to the current date upon issuing this command. • CLEAR EVENT RECORD: Enter YES to clear all of the events in the Event Record. This will eliminate all previous events from the Event Record and create a CLEAR EVENTS event as the new event number 1. The Event Recorder can be cleared only if it is enabled in S1 PQM SETUP \ EVENT RECORDER \ EVENT RECORDER OPERATION. • LOAD FACTORY DEFAULT SETPOINTS: When the PQM is shipped from the factory all setpoints will be set to factory default values. These settings are shown in the setpoint message reference figures. To return a PQM to these known setpoints select YES and press the key while this message is displayed. The display will then warn that all setpoints will be lost and will ask whether to continue. Select YES again to reload the setpoints. It is a good idea to first load factory defaults when replacing a PQM to ensure all the settings are defaulted to reasonable values.
转载请附上此链接：http://www.jiangxidcs.com/
