HIEE220295R0001工业自动化卡件
PAC系统™ RX3i和RSTi EP TCP/IP以太网通信用户手册第1节GFK-2224Y 2019年8月简介2 1.1本手册的修订给定功能可能无法在所有PACSystems以太网接口上实现。要确定特定型号和固件版本上是否有功能，请参阅产品附带的重要产品信息（IPI）文档。PACSystems RX3i和RSTi EP的TCP/IP以太网通信版本包括以下更改：修订日期描述2019年8月Y日•RX3i IC695ETM001 Kxxx可用o向后兼容IC695ETE001 o Station Manager串行端口替换为以太网端口o两个以太网连接器重新定位到模块底部。o阿基里斯2级安全认证测试。o在菜单系统中选择基于用户的参数的新选项。AUP功能主义者被部分否决。•RX3i嵌入式以太网接口的诊断信息已从第12章移至第11章。2018年7月W•添加IC695CPL410（新CPU W/Linux）2018年4月V•将文档扩展至2018年2月U版EPSCPE115•整个过程中添加了CPE302。•澄清（第1.3.4节）哪些产品支持1000Base-T IEEE 802.3。2017年10月T日•增加了CPE400 LAN3（仅冗余LAN）•明确支持各种CPU配置中的冗余IP寻址。2017年8月S日•将内容添加到RSTi EP CPE100的以太网接口状态位。2017年5月R日•添加内容以支持RSTi EP CPE100。2017年3月Q日•添加内容以支持CPE400和嵌入式SNTP。P Sept2015•增加了OPC UA的会话和订阅部分。•增加了支持CPE330（新产品）的内容。PAC系统™ RX3i和RSTi EP TCP/IP以太网通信用户手册第1节GFK-2224Y 2019年8月简介2014年10月3日•适用于RX3i CPE305/CPE310固件版本8.20，使用嵌入式以太网端口支持OPC UA服务器。•适用于RX3i CPE305/CPE310固件版本8.30，嵌入式以太网接口支持EGD Class 1。早期的CPU版本不直接支持EGD。然而，以太网接口模块ETM001支持EGD。L Jun2013新增功能：•使用SRTP的TCP/IP通信服务•SRTP客户端（信道）•Modbus/TCP服务器，支持Modbus一致性等级0、1和2。•Modbus/TCP客户端，支持Modbus一致性等级0、1，以及一致性等级2的功能代码15、22、23和24。•支持单播模式，以及SNTP操作的夏令时和本地时间校正。RX3i嵌入式以太网接口的诊断信息已从第2章第2节移至第11节。配置信息已移至第4节：。编程软件的信息TCP/IP版本。这些通信通过四层TCP/IP（Internet）堆栈使用专有的SRTP和以太网全球数据（EGD）协议。以太网接口具有SRTP客户端/服务器功能。作为客户端，该接口可以启动与包含以太网接口的其他PLC的通信。这是使用COMMREQ功能从PLC梯形图程序完成的。作为服务器，以太网接口响应来自诸如PLC编程软件、运行SRTP应用程序的主机或充当客户端的另一PLC等设备的请求。网络连接以太网电缆主机或控制
PACSystems™ RX3i and RSTi-EP TCP/IP Ethernet Communications User Manual Section 1 GFK-2224Y August 2019 Introduction 2 1.1 Revisions in this Manual A given feature may not be implemented on all PACSystems Ethernet interfaces. To determine whether a feature is available on a given model and firmware version, please refer to the Important Product Information (IPI) document provided with the product. This revision of TCP/IP Ethernet Communications for PACSystems RX3i and RSTi-EP includes the following changes: Rev Date Description Y Aug2019 • RX3i IC695ETM001-Kxxx Available o Backwards compatible with IC695ETM001 o Station Manager serial port replaced with Ethernet port o Two Ethernet connectors relocated to the bottom of the module. o Achilles Level 2 Security cert-tested. o New option to select user-based parameters into menu systems. AUP functionalist is partially deprecated. • Diagnostics information for the RX3i embedded Ethernet interface has been moved from Chapter 12 to Chapter 11. W Jul2018 • Added IC695CPL410 (new CPU w/Linux) V Apr2018 • Extended the document to EPSCPE115 U Feb2018 • Addition of CPE302 throughout. • Clarification (Section 1.3.4) as to which products support 1000Base-T IEEE 802.3. T Oct2017 • Added CPE400 LAN3 (Redundancy-only LAN) • Clarified support for Redundant IP Addressing in various CPU configurations. S Aug2017 • Content added to Ethernet interface Status Bits for RSTi-EP CPE100. R May2017 • Content added in support of RSTi-EP CPE100. Q Mar2017 • Content added in support of CPE400 and embedded SNTP. P Sept2015 • Added section Sessions and Subscriptions for OPC UA. • Content added in support of CPE330 (new product). PACSystems™ RX3i and RSTi-EP TCP/IP Ethernet Communications User Manual Section 1 GFK-2224Y August 2019 Introduction 3 M Oct2014 • Effective with RX3i CPE305/CPE310 firmware version 8.20, OPC UA Server is supported using the embedded Ethernet port. • Effective with RX3i CPE305/CPE310 firmware version 8.30, EGD Class 1 is supported on the embedded Ethernet interface. Earlier CPU versions do not directly support EGD. However, EGD was supported on the Ethernet interface Module ETM001. L Jun2013 Newly available features: • TCP/IP communication services using SRTP • SRTP Client (Channels) • Modbus/TCP Server, supporting Modbus Conformance classes 0, 1, and 2. • Modbus/TCP Client, supporting Modbus Conformance classes 0, 1, and Function Codes 15, 22, 23, and 24 for Conformance class 2. • Support for Unicast mode, and Daylight Saving and Local Time corrections for SNTP operation. Diagnostics information for the RX3i embedded Ethernet interface has been moved from Chapter 2 Section 2:to 11. Configuration information has been moved to Section 4:. Information TCP/IP version of the programming software. These communications use the proprietary SRTP and Ethernet Global Data (EGD) protocols over a four-layer TCP/IP (Internet) stack. The Ethernet interface has SRTP client/server capability. As a client, the interface can initiate communications with other PLCs that contain Ethernet interfaces. This is done from the PLC ladder program using the COMMREQ function. As a server, the Ethernet interface responds to requests from devices such as PLC programming software, a Host computer running an SRTP application, or another PLC acting as a client. Network Connection Ethernet Cable Host Computer or Control
