IS200CVMBG1A工业备件,PLC备件
E启用TR-069 EW200工业蜂窝网关283 TR-069项目值设置描述TR-069默认情况下未选中该框选中启用框以激活TR-069功能。默认选择接口WAN-1。当您完成基本网络WAN-1~WAN-n的设置时，您可以选择WAN-1~WAN-n。当您完成安全>VPN>IPSec/OpenVPN/PPTP/L2TP/GRE设置时，可以选择IPSec/OOpenVPN/PPTP/L2TP/GRE隧道，默认情况下，界面与“IPSec#1”数据模型ACS云数据模型相同。为远程管理选择TR-069数据模型。标准：ACS服务器是标准服务器，完全符合TR069。ACS云数据模型：如果您打算使用云ACS服务器来管理部署的网关，请选择此数据模型。ACS URL Required设置您可以要求ACS管理员提供ACS URL并手动设置ACS Username Required设置。您可以要求ACSmanager提供ACS用户名并手动设置ACSPassword Required设置可以要求ACS manager提供ACS密码并手动设置ConnectionRequest Port 1。所需设置。2.默认设置8099。您可以要求ACS管理器提供ACS ConnectionRequest端口并手动设置值范围：0~65535。ConnectionRequest UserName Required设置可以要求ACS管理员提供ACS ConnectionRequest UserName并手动设置ConnectionRequest Password Required设置您可以要求ACS管理器提供ACS ConnectionRequestPassword并手动设置Inform 1。默认情况下，该框处于选中状态。2.默认情况下，“间隔”值为300。选中启用框后，网关（CPE）将根据间隔设置定期向ACS服务器发送通知消息。值范围：0～86400，用于通知间隔。证书设置默认情况下选中默认框。您可以将其保留为默认值，或从下拉列表中选择所需的证书和密钥。有关证书配置，请参阅对象定义>证书部分。保存单击保存保存设置。撤消单击“撤消”以取消修改。当您完成设置ACS URL ACS用户名ACS密码时，您的网关（CPE、客户端高级设备）可以向ACS服务器发送通知。完成设置ConnectionRequest端口ConnectionRequest用户名ConnectionRequest密码后，ACS服务器可以要求网关（CPE）向ACS服务器发送通知。EW200工业蜂窝网关284启用STUN服务器STUN设置配置项值设置描述STUN默认选中复选框选中启用复选框以激活STUN功能。服务器地址1。字符串格式：任意IPv4地址2。这是一个可选项目。指定预期STUN服务器的IP地址。服务器端口1。可选设置2。3478默认设置为指定预期STUN服务器的端口号。值范围：1~65535。存活期1。默认设置为可选设置2.0指定与STUN服务器连接的保持活动时间段。值范围：0~65535。保存单击保存保存设置。撤消单击“撤消”以取消修改。EW200工业
nable TR-069 EW200 Industrial Cellular Gateway 283 TR-069 Item Value setting Description TR-069 The box is unchecked by default Check the Enable box to activate TR-069 function. Interface WAN-1 is selected by default. When you finish set basic network WAN-1 ~ WAN-n, you can choose WAN-1 ~ WAN-n When you finish set Security > VPN > IPSec/OpenVPN/PPTP/L2TP/GRE, you can choose IPSec/OpenVPN/PPTP/L2TP/GRE tunnel, the interface just like “IPSec #1” Data Model ACS Cloud Data Model is selected by default. Select the TR-069 data model for the remote management. Standard : the ACS Server is a standard one, which is fully comply with TR069. ACS Cloud Data Model: Select this data model if you intend to use a Cloud ACS Server to managing the deployed gateways. ACS URL Required setting You can ask ACS manager to provide ACS URL and manually set ACS Username Required setting You can ask ACS manager to provide ACS username and manually set ACS Password Required setting You can ask ACS manager to provide ACS password and manually set ConnectionRequest Port 1. Required setting. 2. By default 8099 is set. You can ask ACS manager to provide ACS ConnectionRequest Port and manually set Value Range: 0 ~ 65535. ConnectionRequest UserName Required setting You can ask ACS manager to provide ACS ConnectionRequest Username and manually set ConnectionRequest Password Required setting You can ask ACS manager to provide ACS ConnectionRequest Password and manually set Inform 1. The box is checked by default. 2. The Interval value is 300 by default. When the Enable box is checked, the gateway (CPE) will periodicly send inform message to ACS Server according to the Interval setting. Value Range: 0 ~ 86400 for Inform Interval. Certification Setup The default box is selected by default You can leave it as default or select an expected certificate and key from the drop down list. Refer to Object Definition > Certificate Section for the Certificate configuration. Save Click Save to save the settings. Undo Click Undo to cancel the modifications. When you finish set ACS URL ACS Username ACS Password, your gateway (CPE, Client Premium Equipment) can send informs to ACS Server. When you finish set ConnectionRequest Port ConnectionRequest Username ConnectionRequest Password, ACS Server can ask the gateway (CPE) to send informs to ACS Server. EW200 Industrial Cellular Gateway 284 Enable STUN Server STUN Settings Configuration Item Value setting Description STUN The box is checked by default Check the Enable box to activate STUN function. Server Address 1. String format: any IPv4 address 2. It is an optional item. Specify the IP address for the expected STUN Server. Server Port 1. An optional setting 2. 3478 is set by default Specify the port number for the expected STUN Server. Value Range: 1 ~ 65535. Keep Alive Period 1. An optional setting 2.0 is set by default Specify the keep alive time period for the connection with STUN Server. Value Range: 0 ~ 65535. Save Click Save to save the settings. Undo Click Undo to cancel the modifications. EW200 Industrial
