IS200EDEXG1A DCS模块卡件,输出卡件
EW200工业蜂窝网关30接口配置：接口配置项值设置描述物理接口1。所需设置2。WAN-1是主界面，出厂时设置为“始终打开”。从可用界面下拉列表中选择一个期望的界面。根据网关型号，禁用和故障切换选项将仅适用于多个WAN网关。WAN-2~WAN-4接口仅适用于多个WAN网关。操作模式所需设置定义界面的操作模式。选择“始终打开”以使此WAN始终处于活动状态。选择禁用以禁用此WAN接口。选择“故障切换”以在主WAN链路或辅助WAN链路发生故障时使此WAN成为故障切换WAN。然后选择要切换故障切换的主WAN接口或现有辅助WAN接口。（注：对于WAN-1，只有“始终打开”选项可用。）VLAN标记可选设置选中“启用”框以输入ISP提供的标记值。否则，取消选中该框。值范围：1~4095。te：此功能适用于3G/4G WAN连接。EW200工业蜂窝网关31 2.1.2 Internet设置在为每个WAN连接指定物理接口之后，连接配置文件必须满足ISP的拨入过程，以便网关Intranet中的所有客户端主机都可以访问Internet。在“Internet设置”页面上有一些配置窗口：“Internet连接列表”、“Internet连接配置”、“WAN类型配置”以及每个WAN类型的相关配置窗口。对于每个WAN接口的Internet设置，必须首先指定其物理接口的WAN类型，然后指定该WAN类型的相关参数配置。在“Internet设置列表”窗口中单击物理接口的“编辑”按钮后，将出现“Internet连接配置”窗口，让您指定将用于该物理接口以建立Internet连接的WAN类型。根据您选择的WAN类型，您可以在每个相应的配置窗口中设置必要的参数。EW200工业蜂窝网关32 Internet连接列表-以太网接口的以太网WAN WAN类型：以太网是M2M网关的通用WAN和上行链路接口。通常它与xDSL或电缆调制解调器连接，以便您设置WAN连接。与ISP连接有多种WAN类型。•静态IP：如果ISP提供固定IP，请选择此选项。这通常比较昂贵，但对于合作要求很重要。•动态IP：DHCP服务器为WAN分配的IP地址每次都不同。这更便宜，通常供消费者使用。
EW200 Industrial Cellular Gateway 30 Interface Configuration: Interface Configuration Item Value setting Description Physical Interface 1. Required setting 2. WAN-1 is the primary interface and is factory set to Always on. Select one expected interface from the available interface dropdown list. Depending on the gateway model, Disable and Failover options will be available only to multiple WAN gateways. WAN-2 ~ WAN-4 interfaces are only available to multiple WAN gateways. Operation Mode Required setting Define the operation mode of the interface. Select Always on to make this WAN always active. Select Disable to disable this WAN interface. Select Failover to make this WAN a Failover WAN when the primary or the secondary WAN link fails. Then select the primary or the existing secondary WAN interface to switch Failover from. (te: for WAN-1, only Always on option is available.) VLAN Tagging Optional setting Check Enable box to enter tag value provided by your ISP. Otherwise uncheck the box. Value Range: 1 ~ 4095. te: This feature is T available for 3G/4G WAN connection. EW200 Industrial Cellular Gateway 31 2.1.2 Internet Setup After specifying the physical interface for each WAN connection, the connection profile must be cond to satisfy the dial-in process of the ISP, so that all client hosts in the Intranet of the gateway can access the Internet. On the "Internet Setup" page there are some configuration windows: "Internet Connection List", "Internet Connection Configuration", "WAN Type Configuration" and related configuration windows for each WAN type. For the Internet setup of each WAN interface, you must specify its WAN type of physical interface first and then the related parameter configuration for that WAN type. After clicking on the "Edit" button of a physical interface in "Internet Setup List" window, the "Internet Connection Configuration" window will appear to let you specify which kind of WAN type that you will use for that physical interface to make an Internet connection. Based on your chosen WAN type, you can con necessary parameters in each corresponding configuration window. EW200 Industrial Cellular Gateway 32 Internet Connection List - Ethernet WAN WAN Type for Ethernet Interface: Ethernet is the common WAN and uplink interface for M2M gateways. Usually it is connected with xDSL or cable modem for you to setup the WAN connection. There are various WAN types for connection with an ISP. • Static IP: Select this option if the ISP provides a fixed IP. This is usually is more expensive, but important for cooperate requirements. • Dynamic IP: The assigned IP address for the WAN by a DHCP server is different every time. This is cheaper and usually for consumer use.
