IS200STAIH2A DCS模块卡件,输出卡件
yes bitseq Bit Sequencer在PLC存储器中对1到一组位进行排序。yes swap swap交换一个单词中的两种类型的数据，或者在一个双单词中交换两个单词。yes comreq通信请求向PLC中的智能模块发送通信请求。yes vme rd vme Read从指定vme地址的第三方vme板读取数据。yes vme wr vme Write将数据写入指定vme地址的第三方vme板。yes vme rmw vme读/修改/写使用vme总线上的读/修改或写周期更新第三方vme板上的数据元素。yes vme ts vme Test and Set Handles信号量位于第三方vme板上。yes vme cfgrd vme Configuration Read读取vme模块的配置。*vme cfgwr vme配置写入将配置写入vme模块。*程序控制函数调用调用使程序执行转到指定的程序块或外部块。*do io do立即为指定范围的输入或输出提供服务。也可以将扫描的副本放在内部存储器中。*sus-io Suspend暂停所有正常更新，Do指令指定的更新除外。*mcr主控制继电器启动主控制继电器范围。MCR及其后续ENDMCR之间的所有逻辑梯级将在无功率流的情况下执行。yes endmcr End Master Control Relay结束主控制继电器范围。yes跳转跳转到逻辑中LABEL指示的指定位置。yes label标签JUMP指令的目标位置。yes commnt注释。横档式解释。yes svcreq服务请求：一种特殊的PLC服务功能。是（功能1、3、4、6、8、14、19除外）*pidisa ISA算法选择标准ISA PID算法。*pidin独立算法选择非交互独立PID算法。*for/endfor/exit开始、结束、退出for循环。用于在改变循环中FOR INDEX VAR的值时，将梯级逻辑重复指定次数。*sfcres SFC重置重置SFC拓扑，如果OVR输入处于活动状态，则清除所有覆盖。**仅可用于GMR系统不要求且与安全无关的操作。系统的这些部分可能会收到TÜV或非TÜV批准的状态，包括某些其他Genius模块、未经批准的基于机架的模块，或任何其他未经特别批准用于安全应用的允许Genius和90系列组件。5-14 Genius®模块冗余灵活三模块冗余（TMR）GFT-177A系统技术产品概述–1998年2月5支持的系统数据类型和GMR系统中的典型使用为了在CPU中处理信息、执行逻辑比较和移动信息，GMR应用程序中可使用多种数据类型。下表显示了用于参考位和面向字操作的各种类型和符号。它还指示通信模块可能写入的内存类型。在DCS系统、现场总线系统、计算机和其他智能主机设备以及从设备之间交换数据的能力对于任何技术上当前的系统都非常重要。默认情况下，所有内存区域都是写保护的。
yes bitseq Bit Sequencer Sequences a 1 through a group of bits in PLC memory. yes swap Swap Swaps two types of data in a word, or two words in a double word. yes comreq Communication Request Sends a communications request to a smart module in the PLC. yes vme rd VME Read Reads data from a third–party VME board at a specified VME address. yes vme wr VME Write Writes data to a third–party VME board at a specified VME address. yes vme rmw VME Read/Modify/Write Updates a data element on a third–party VME board using the read/modify/write cycle on the VME bus. yes vme ts VME Test and Set Handles semaphores located on third–party VME boards. yes vme cfgrd VME Configuration Read Reads the configuration for a VME module. * vme cfgwr VME Configuration Write Writes the configuration to a VME module. * Program Control Functions call Call Causes a program execution to go to a specified program block or external block. * do io Do Services a specified range of inputs or outputs immediately. Optionally, a copy of the scanned can be placed in internal memory. * sus io Suspend Suspends all normal updates except those specified by the Do instructions. * mcr Master Control Relay Starts a master control relay range. All logic rungs between the MCR and its subsequent ENDMCR will be executed with no power flow. yes endmcr End Master Control Relay Ends a Master Control Relay range. yes jump Jump Jumps to a specified location indicated by LABEL in the logic. yes label Label The target location of a JUMP instruction. yes commnt Comment. A rung explanation. yes svcreq Service Request: A special PLC service function. yes (except functions 1, 3, 4, 6, 8, 14, 19) * pidisa ISA Algorithm Selects the standard ISA PID algorithm. * pidind Independent Algorithm Selects the non–interacting independent PID algorithm. * for/endfor/exit Start, End, Exit FOR loop. Used to repeat rung logic a specified number of times while varying the value of the FOR INDEX VAR in the loop. * sfcres SFC Reset Resets the SFC topology and, if the OVR input is active, clears all overrides. * * Can be used only for operations that are not required by the GMR system and which are not safety-related. These portions of the system may receive status from TÜV or non-TÜV approved , including certain other Genius blocks, non-approved rack-based modules, or any other allowable Genius and Series 90 Family components not specifically approved for use in a safety application. 5-14 Genius® Modular Redundancy Flexible Triple Modular Redundant (TMR) GFT-177A System Technical Product Overview – February 1998 5 System Data Types Supported, and Typical Use in a GMR System In order to process information, execute logic comparisons, and move information within the CPU, several data types are available for use in the GMR application program. The table below indicates the various types and notation used for the referenced bit and word–oriented operations. It also indicates which memory types can potentially be written to by a communications module. The ability to exchange data between DCS systems, field bus systems, computer and other intelligent host devices, as well as slave devices is important for any technically– current system. By default, all memory areas are write– protected.
