MOX12-P3509 工业自动化卡件
常开（a触点）或常闭（B触点）触点的C状态。2.在给定开关位置，白色（W）或黑色（B）执行器下的凸轮位置。请注意，在第9页的表2中，标准选择开关（凸轮代码“KB7”）以及凸轮代码“KA1”和“KA7”的目标表是相同的，无论控制块安装在白色执行器或blk执行器后面。凸轮代码“KC1”、“KC7”和“KD7”具有所有六个可用的组合。Eh标准和旋钮操纵杆是用白色插件组装的。机翼操纵杆操作员为标准灰色。如果订购数量为10个或更多的装置，则可提供其他颜色。对于标准和旋钮操纵杆操作员，请从下表中选择一个颜色代码字母。在列出的目录号中破折号后的第一个字母后插入颜色代码字母。例如，带有绿色插件的800T-J2KA1将是800T-JB2KA1。代码字母颜色绿色蓝色黄色ABCE对于翼杆操作员（仅提供灰色或），将字母“G”替换为字母“a”。要订购未安装彩色嵌件的标准或旋钮操纵杆，请在所列目录号破折号后的第一个字母后添加字母“X”。包含其中一个eh的特殊pket不收取额外费用。目标表特殊颜色公告800T油密选择开关产品数据17选择特殊照明选择开关与选择特殊非照明选择开关类似。然而，照明设备的控制块只能安装在白色启动器后面。照明设备上的灯的电源模块必须安装在设备的blk侧后面。因此，照明设备具有2位模块后缀代码，而非照明设备具有4位代码。示例：800T-16JR2KB7AX工业控制目录中列出的照明选择开关的后缀代码可以修改，以实现特殊的控制布置。可以使用特殊装置，使一个电路的触点在第二个电路的接头断开之前闭合。由于这些选择器开关可能被误用，因此未在工业控制目录中列出。如果您的应用程序需要重叠凸轮，请联系最近的Allen-Bradley销售办公室。照明选择开关重叠凸轮公告800T油密选择开关
C state of a contt either normally open (A contts) or normally closed (B contts). 2. The position of the cam under the White (W) or Blk (B) tuator in the given switch position. Note in Table 2 on Page 9 the target tables for the standard selector switch (Cam Code “KB7”), plus Cam Codes “KA1”, and “KA7” are the same whether the contt blocks are mounted behind the white tuator or blk tuator. Cam Codes “KC1”, “KC7” and “KD7” have all six contt binations available. Eh standard and knob lever operator is ftory assembled with a white insert. The wing lever operator is standard as gray. Other colors are available if orde in ftory assembled quantities of 10 or more devices. For standard and knob lever operators select a color code letter from the table below. Insert the color code letter after the first letter following the dash in the listed catalog number. Example, 800T-J2KA1 with a green insert would bee 800T-JB2KA1. Code Letter Color Green Blue Yellow ABCE For a wing lever operator (only available in gray or ), reple the letter “G” with the letter “A”. To order standard or knob lever operators without color inserts installed, add the letter “X” after the first letter following the dash of the listed catalog number. A special pket containing one of eh is included at no extra charge. Target Tables Special Colors Bulletin 800T Oiltight Selector Switches Product Data 17 Selection of special illuminated selector switches is similar to selecting special non-illuminated selector switches. However, contt blocks for illuminated devices can only be mounted behind the white tuator. The power module for the lamp on illuminated devices must be mounted behind the blk side of the device. Thus, illuminated devices have a 2-digit modular suffix code versus a 4-digit code for non-illuminated devices. Example: 800T-16JR2KB7AX The suffix codes for the illuminated selector switches listed in the Industrial Control catalog can be modified to hieve special contt arrangements. Special devices are available which allow contts of one circuit to close before the contts of a second circuit open. These selector switches are not listed in the Industrial Control catalog because of their potential misuse. If your application requires overlapping cams, contt your nearest Allen-Bradley Sales Office. Illuminated Selector Switches Overlapping Cams Bulletin 800T Oiltight Selector Switches
