MVME133A-20工业自动化卡件
配置其他电缆，如43GT-FIS40SL，为玻璃纤维提供带有矩形开口的传感头，称为“开槽”电缆（见下图）。控制Interfe端头传感端头使用这些等效直径来确定开槽电缆的大致性能。槽尺寸近似直径=1.128 x长度x宽度注意：危险环境中的防爆应用不建议使用光纤电缆。光纤电缆可以为爆炸性烟雾提供从危险区域到安全区域的路径。玻璃光纤电缆简介PHOTOSwitcher光电传感器请访问我们的网站：.ab./catalogs。1--235首选可用目录。编号以粗体打印。用于大孔径传感器的玻璃光纤电缆第1-2361-250页上的光纤电缆用于下面所示的大孔径传感器。42GxF---900x大孔径传感器：42SRF--60xx 42SRF--65xx 42GTGF-100x0 42GTGF-103x0 42xRx---5x00FO 42GxF---900x 42EF--G1xxA 42KL--G1xxx注意：标称传感距离由于光纤电缆之间的差异，传感距离可能变化很大分叉电缆的传感距离用白纸测量（90%反射率）。其他冲浪可能反射性较低，因此传感距离较短。公布的数字基于广泛的测试，并且是保守的。传输光束电缆的传感距离是从尖端到尖端测量的。影响距离的应用考虑因素传感器选择的目标环境处理器的反射率，如范围扩展透镜电缆的长度。有关更多信息，请咨询产品支持。所示尺寸均为典型尺寸。第1-2361-250页上的光纤电缆适用于大孔径传感器，如下页所示：大孔径传感器用玻璃光纤电缆[4.6（0.187英寸）]4.6（0.187 in.）直径光纤控制提示大孔径：4.6（0.188英寸）直径PHOTOSwitcher光电传感器1-242请访问我们的网站：.ab/catalogs。首选可用目录。编号以粗体打印。近似尺寸[（in.）]传感头材料光纤束直径[（in。)]护套材料传感距离[]13.5（0.53）38.1（1.5）7.9（0.31）5/16 x 24UNF螺纹黄铜3.2（0.125）不锈钢43GT-TBB25SL PVC 43GT--TBB25ML 1.6（0.062）不锈钢43GT--TBB15SL PVC 43GT--TB B15ML 4.0（0.156）不锈钢43GT--TBB30SL PVC 43GT--TBB30ML 2.5 x 0.5（0.1 x 0.02）E-W槽不锈钢43GT--TB B40SL PVC 43 GT--TBB40ML不锈钢3.2（0.1255）不锈钢钢43GT-TBS25SL PVC 43GT-TBS25ML 13.5（0.53）12.7（0.5）4.5（0.18）#8-32螺纹不锈钢0.7（0.027）不锈钢43GT-TFS00SL PVC 43GT-TFS00ML 1.2（0.046）不锈钢43GT-TTFS10SL PVC 43GT-TFS10ML 13.5（0.52）101.6（4.0）7.6（0.3）5/16 x 24UNF螺纹不锈钢3.2。12.7（0.5）127（0.5）25.4（1.0）4.75（0.187）不锈钢0.7（0.027）不锈钢43GT-MRS00SL PVC
configuration. Other cables such as 43GT--FIS40SL offer sensing tips with a rectangular shaped opening for the glass fibers, refer to as “slotted” cables (see illustration below). Control Interfe End Tip Sensing End Tip Use these equivalent diameters to determine the approximate performance of slotted cables. Slot Dimensions Approximate diameter = 1.128 x Length x Width ATTENTION Fiber optic cables are not recoended for explosion-proof applications in hazardous environments. The fiber optic cable can provide a path for explosive fumes to travel from the hazardous area to the safe area. Glass Fiber Optic Cables Introduction PHOTOSWITCHR Photoelectric Sensors Visit our website: .ab./catalogs. 1--235 Prefer availability cat. nos. are printed in bold. Glass Fiber Optic Cables for use with Large Aperture Sensors The fiber optic cables on pages 1--2361--250 are for use with the large aperture sensors shown below. 42GxF--900x Large Aperture Sensors: 42SRF--60xx 42SRF--65xx 42GTGF--100x0 42GTGF--103x0 42xRx--5x00FO 42GxF--900x 42EF--G1xxA 42KL--G1xxx Note: Nominal Sensing Distance Due to the variation between fiber optic cables, sensing distance can vary widely The sensing distance of bifurcated cables is measu with white paper (90% reflectivity). Other surfes may be less reflective and therefore would have shorter sensing distances. The published numbers are based on extensive testing and are conservative The sensing distance of transmitted beam cables is measu from tip to tip Application considerations that effect distance Sensor selected Reflectivity of target Environment cessories such as range extending lenses Length of the cable Consult with product support for additional information. All dimensions indicated are typical. The fiber optic cables on pages 1--2361--250 are for use with large aperture sensors as seen on the following pages: Glass Fiber Optic Cables Cables for Large Aperture Sensors [4.6 (0.187 in.)] 4.6 (0.187 in.) diameter fiber control tips Large Aperture: 4.6 (0.187 in.) diameter PHOTOSWITCHR Photoelectric Sensors 1--242 Visit our website: .ab./catalogs. Prefer availability cat. nos. are printed in bold. Approximate Dimensions [ (in.)] Sensing Tip Material Fiber Bundle Diameter [ (in.)] Sheathing Material Sensing Distance [] 13.5 (0.53) 38.1 (1.5) 7.9 (0.31) 5/16 x 24UNF Thread Brass 3.2 (0.125) Stainless Steel 43GT-TBB25SL PVC 43GT--TBB25ML 1.6 (0.062) Stainless Steel 43GT--TBB15SL PVC 43GT--TBB15ML 4.0 (0.156) Stainless Steel 43GT--TBB30SL PVC 43GT--TBB30ML 2.5 x 0.5 (0.1 x 0.02) E-W Slot Stainless Steel 43GT--TBB40SL PVC 43GT--TBB40ML Stainless Steel 3.2 (0.125) Stainless Steel 43GT--TBS25SL PVC 43GT--TBS25ML 13.5 (0.53) 12.7 (0.5) 4.5 (0.18) #8-32 Thread Stainless Steel 0.7 (0.027) Stainless Steel 43GT--TFS00SL PVC 43GT--TFS00ML 1.2 (0.046) Stainless Steel 43GT--TFS10SL PVC 43GT--TFS10ML 13.5 (0.53) 101.6 (4.0) 7.6 (0.3) 5/16 x 24UNF Thread Stainless Steel 3.2 (0.125) Stainless Steel 43GT--TYS25SL PVC 43GT--TYS25ML #8-32 Thread 1.65 (0.06) Dia. 12.7 (0.5) 12.7 (0.5) 25.4 (1.0) 4.75 (0.187) Stainless Steel 0.7 (0.027) Stainless Steel 43GT--MRS00SL PVC
